00:00:06.940 --> 00:00:08.656 So this part of the recording
00:00:08.656 --> 00:00:10.839 is going to be CEF installed.
00:00:10.840 --> 00:00:12.975 Where do 2024 eight 2021 dot one
00:00:12.975 --> 00:00:15.388 side by side here to pick folders.
00:00:15.390 --> 00:00:17.646 OK so to do this I've just finished
00:00:17.646 --> 00:00:19.286 installing like in running the
00:00:19.286 --> 00:00:20.638 environment install I should
00:00:20.638 --> 00:00:22.539 have everything I need installed,
00:00:22.540 --> 00:00:24.759 but if I run into this missing
00:00:24.759 --> 00:00:27.418 on the way I'll take care of it.
00:00:27.420 --> 00:00:30.648 This submission zoom through.
00:00:30.650 --> 00:00:31.890 Then pick it up later.
00:00:35.450 --> 00:00:36.323 So Visual Studio,
00:00:36.323 --> 00:00:38.724 all that stuff should be ready for me
00:00:38.724 --> 00:00:40.548 to start actually doing this stuff.
00:00:40.550 --> 00:00:43.574 So when I make two folders here like
00:00:43.574 --> 00:00:46.920 made up for the dates and 2020.1 dot.
00:00:46.920 --> 00:00:50.580 Is it not 2021 dot 1.1?
00:00:50.580 --> 00:00:52.498 I'm going to go ahead and make
00:00:52.498 --> 00:00:54.199 over for this year because.
00:00:54.200 --> 00:00:56.652 2020.1 and 2020 dot.
00:00:56.652 --> 00:01:00.330 Because there's a couple of other
00:01:00.448 --> 00:01:04.306 clients who are on those versions.
00:01:04.310 --> 00:01:06.296 That I will eventually check out
00:01:06.296 --> 00:01:08.340 later on with them right now,
00:01:08.340 --> 00:01:12.849 but here I want to have my dev folder.
00:01:12.850 --> 00:01:14.130 That folder, typically this one
00:01:14.130 --> 00:01:16.250 would be master, but that's fine.
00:01:16.250 --> 00:01:20.378 Inside here, we're going to use older stuff.
00:01:20.380 --> 00:01:25.050 And you folder web 9.
00:01:25.050 --> 00:01:26.616 Those in there and their way.
00:01:26.620 --> 00:01:28.870 I have those both set up.
00:01:28.870 --> 00:01:30.214 I'm OK next.
00:01:30.214 --> 00:01:33.350 I need to start cleaning some stuff.
00:01:33.350 --> 00:01:36.038 I need to clone set itself.
00:01:38.390 --> 00:01:41.258 Name? Need a clown?
00:01:43.770 --> 00:01:46.000 DN N9-F
00:01:48.340 --> 00:01:51.598 we should both work. Give me the clothes.
00:01:54.180 --> 00:01:55.668 They don't have any other copies up here.
00:01:55.670 --> 00:01:57.296 I don't have like it, but I can just
00:01:57.296 --> 00:01:58.830 copy over really fast in the hard drive.
00:01:58.830 --> 00:02:00.318 I have to actually download it from online.
00:02:03.460 --> 00:02:05.098 OK, that will give you my web.
00:02:17.700 --> 00:02:22.034 Self. So now that I have those there,
00:02:22.040 --> 00:02:24.191 I'm going to get folder Web 9 copy to
00:02:24.191 --> 00:02:26.088 the other one. Same thing for Seth.
00:02:29.330 --> 00:02:33.870 Prompt and get reset hard.
00:02:33.870 --> 00:02:36.026 So that it puts the files out.
00:02:36.030 --> 00:02:38.926 This is way faster than doing other stuff.
00:02:38.930 --> 00:02:40.400 And then I convert this to
00:02:40.400 --> 00:02:41.580 the release branch for 24.
00:02:41.580 --> 00:02:43.660 Eight for this one.
00:02:43.660 --> 00:02:48.650 You are my go to this evening and get set.
00:02:48.650 --> 00:02:53.390 Hard. Files back.
00:02:53.390 --> 00:02:55.756 OK, not to do anything else there.
00:02:55.760 --> 00:02:58.748 Anything else there OK?
00:02:58.750 --> 00:03:00.365 This guy talks get switch
00:03:00.365 --> 00:03:01.980 check out instead of develop.
00:03:01.980 --> 00:03:03.972 I want the release branch and
00:03:03.972 --> 00:03:05.859 other remotes and sorted by name.
00:03:05.860 --> 00:03:08.092 Right now I'm going to fly by last
00:03:08.092 --> 00:03:10.713 commit stuff in here 'cause I know that
00:03:10.713 --> 00:03:12.640 releases getting commits more recently.
00:03:12.640 --> 00:03:14.894 So like there's from the second there.
00:03:14.900 --> 00:03:16.520 Yesterday over exists she didn't.
00:03:16.520 --> 00:03:17.076 But yeah,
00:03:17.076 --> 00:03:19.022 so I don't have to type any
00:03:19.022 --> 00:03:21.039 of that stuff out manually.
00:03:21.040 --> 00:03:22.978 Just pick it up for me.
00:03:25.560 --> 00:03:29.450 Convert to the other version of. Seth.
00:03:31.750 --> 00:03:33.028 Was that OK?
00:03:35.280 --> 00:03:37.170 Now there is from the suffix.
00:03:37.170 --> 00:03:38.458 There's the fetching prune.
00:03:38.458 --> 00:03:41.577 I want to put that in here and in here.
00:03:41.580 --> 00:03:43.160 I'm going to do that.
00:03:43.160 --> 00:03:44.420 Both of these sides.
00:03:44.420 --> 00:03:46.310 It's this is absolutely the latest.
00:03:46.310 --> 00:03:48.400 Anyway, I'm just burning it
00:03:48.400 --> 00:03:50.490 for the sake of argument.
00:03:50.490 --> 00:03:52.634 What this does is it goes through and
00:03:52.634 --> 00:03:55.095 gets rid of branches that are bad or old.
00:03:55.100 --> 00:03:55.823 From your system,
00:03:55.823 --> 00:03:57.990 which gets rid of that stuff with this one.
00:04:07.260 --> 00:04:14.210 OK, so. What I need is.
00:04:14.210 --> 00:04:17.546 What what we need I need this guy?
00:04:17.550 --> 00:04:22.006 I need to go to 24 eight Qi.
00:04:22.010 --> 00:04:27.218 ASF and I need to copy.
00:04:27.220 --> 00:04:30.150 Copy all of this stuff.
00:04:30.150 --> 00:04:32.718 Over to here.
00:04:32.720 --> 00:04:35.401 Then I need to do the same
00:04:35.401 --> 00:04:38.188 thing for the Qi between 21.1.
00:04:38.190 --> 00:04:42.110 So those things get dirty fault files.
00:04:42.110 --> 00:04:44.140 Loaded then I'm going to
00:04:44.140 --> 00:04:45.764 collapse everything over here.
00:04:45.770 --> 00:04:49.433 I need a I need admin command prompt so.
00:04:53.030 --> 00:04:53.996 You know what I might need
00:04:53.996 --> 00:04:55.149 to go ahead and just reboot?
00:04:55.150 --> 00:04:56.566 'cause I've been changing the path and stuff,
00:04:56.570 --> 00:04:57.926 so I'm going to reboot and
00:04:57.926 --> 00:04:59.520 come and re join the meeting.
00:04:59.520 --> 00:05:00.944 Alright, we're back in.
00:05:00.944 --> 00:05:03.080 I rebooted so that the paths
00:05:03.154 --> 00:05:04.706 and everything can reset
00:05:04.706 --> 00:05:06.646 and be cleared up alright.
00:05:09.100 --> 00:05:09.680 Stuff.
00:05:14.660 --> 00:05:18.268 There are things that closed when I rebooted,
00:05:18.270 --> 00:05:21.036 but that's final packing background. OK,
00:05:21.036 --> 00:05:25.164 so the thing about this stuff for install?
00:05:25.170 --> 00:05:27.746 Is you have this base file you
00:05:27.746 --> 00:05:30.210 gotta rename it to that one too.
00:05:30.210 --> 00:05:34.590 That an you gotta fill in some stuff in here.
00:05:34.590 --> 00:05:35.915 Inside here it talks about
00:05:35.915 --> 00:05:37.450 what version of stuff it is,
00:05:37.450 --> 00:05:39.754 what the project is I'm going
00:05:39.754 --> 00:05:42.180 to use clarity for right now.
00:05:42.180 --> 00:05:44.630 The names of the stuff it automatically
00:05:44.630 --> 00:05:46.708 generates a database name and everything
00:05:46.708 --> 00:05:48.955 your domain name and all that stuff
00:05:49.018 --> 00:05:51.178 for maintains connecting to SQL 2019.
00:05:51.180 --> 00:05:52.910 All that stuff in there.
00:05:52.910 --> 00:05:57.285 And so you gotta do those pieces.
00:05:57.290 --> 00:05:59.546 The. MPM Buildtools piece is the
00:05:59.546 --> 00:06:02.159 part that I wanted to figure out,
00:06:02.160 --> 00:06:04.904 'cause I think I want to go ahead
00:06:04.904 --> 00:06:07.359 and try to do that manually.
00:06:07.360 --> 00:06:08.232 Before I run this,
00:06:08.232 --> 00:06:09.540 but this is the first time,
00:06:09.540 --> 00:06:11.066 I'm sure she will let it run,
00:06:11.070 --> 00:06:12.806 and if it's a problem will solve it.
00:06:12.810 --> 00:06:14.810 That way you can see that the solving
00:06:14.810 --> 00:06:16.581 the problem which I know is something
00:06:16.581 --> 00:06:18.532 that Chris once we do. OK, so.
00:06:18.532 --> 00:06:21.420 I'm going to leave that in there now.
00:06:21.420 --> 00:06:22.668 The database name that is going
00:06:22.668 --> 00:06:23.930 to make it a project,
00:06:23.930 --> 00:06:25.792 so it's going to be in this
00:06:25.792 --> 00:06:27.370 case it would be clarity.
00:06:27.370 --> 00:06:28.256 And then.
00:06:28.256 --> 00:06:30.028 Clearly understand Thunder score,
00:06:30.030 --> 00:06:31.420 environment and environment is local.
00:06:31.420 --> 00:06:33.572 So in my SMS I need to have
00:06:33.572 --> 00:06:34.769 this database is there.
00:06:41.200 --> 00:06:42.614 Connect to this and this could make
00:06:42.614 --> 00:06:44.010 sure that the database is there.
00:06:44.010 --> 00:06:45.730 I need a blank database.
00:06:45.730 --> 00:06:49.674 For clarity. Underscore staff
00:06:49.674 --> 00:06:52.868 underscore local. And the owner.
00:06:55.310 --> 00:06:57.262 I want to make sure I have the
00:06:57.262 --> 00:06:58.879 honor to be in this fight.
00:06:58.880 --> 00:07:02.024 Options. I don't need to do
00:07:02.024 --> 00:07:04.750 anything in special in here.
00:07:04.750 --> 00:07:06.580 I will give something to general.
00:07:06.580 --> 00:07:08.715 It's going to put them into here.
00:07:08.720 --> 00:07:11.160 It's not where I want those to go.
00:07:11.160 --> 00:07:13.710 I want those to go.
00:07:13.710 --> 00:07:16.220 Two databases I know why
00:07:16.220 --> 00:07:18.730 it won't default to that.
00:07:18.730 --> 00:07:19.840 Whole bunch of times during
00:07:19.840 --> 00:07:22.730 the install process, didn't I?
00:07:22.730 --> 00:07:24.278 It's gonna be clarity or separable,
00:07:24.280 --> 00:07:27.020 so that would be like.
00:07:27.020 --> 00:07:29.066 ATIR Square South Lake Shore local
00:07:29.066 --> 00:07:30.880 power 80 underscores funds for QA.
00:07:30.880 --> 00:07:32.490 If it's the QA environment,
00:07:32.490 --> 00:07:33.378 all that stuff so.
00:07:33.378 --> 00:07:35.032 Is that one and then the other
00:07:35.032 --> 00:07:36.640 one is supposed to actually be
00:07:36.640 --> 00:07:38.328 a database that I would restore,
00:07:38.330 --> 00:07:39.716 but I would need my for the
00:07:39.716 --> 00:07:40.610 client to do that,
00:07:40.610 --> 00:07:42.073 so I'm going to install for the
00:07:42.073 --> 00:07:43.299 clients that I have my VPN.
00:07:45.870 --> 00:07:48.366 Trying to get from Kevin's history with me.
00:07:55.600 --> 00:07:57.448 No, it actually. He gave the
00:07:57.448 --> 00:07:58.680 instructions in new clean.
00:07:58.680 --> 00:08:01.443 Oh so let's go to the new cleaner duck.
00:08:05.280 --> 00:08:09.080 VPN instructions.
00:08:09.080 --> 00:08:11.180 We don't need those windows anymore
00:08:11.180 --> 00:08:13.539 because we did that and it worked.
00:08:13.540 --> 00:08:15.220 Instructions for clients.
00:08:18.520 --> 00:08:20.550 Appear to download for Windows.
00:08:24.320 --> 00:08:25.340 And that's
00:09:19.460 --> 00:09:21.110 open Newport Beach.
00:09:23.150 --> 00:09:26.108 Hang on to this free software.
00:09:26.110 --> 00:09:28.082 Follow block configured VPN
00:09:28.082 --> 00:09:30.050 connection name, clarity, clarity.
00:09:33.240 --> 00:09:36.168 Those 7.27 dot 33.162.
00:09:44.300 --> 00:09:45.680 Save the login.
00:09:50.690 --> 00:09:53.603 Tickets done.
00:09:53.603 --> 00:09:56.354 This one does not seem to offer
00:09:56.354 --> 00:09:59.289 the do not warn on an invalid.
00:09:59.290 --> 00:10:00.778 Option, maybe that's something
00:10:00.778 --> 00:10:02.266 that will happen later.
00:10:02.270 --> 00:10:04.426 But I've already typed my password out,
00:10:04.430 --> 00:10:06.600 so I'm gonna save it there next.
00:10:06.600 --> 00:10:08.140 See if it goes in.
00:10:13.660 --> 00:10:14.240 Yes.
00:10:17.060 --> 00:10:18.768 We will just go and be fine.
00:10:23.490 --> 00:10:25.410 And maybe I really with it like settings,
00:10:25.410 --> 00:10:27.330 they could check it off once I'm connected.
00:10:30.250 --> 00:10:34.756 Settings, Nope. That's
00:10:34.756 --> 00:10:36.780 the only option. OK, so.
00:10:39.210 --> 00:10:40.280 Yeah, get everything else OK,
00:10:40.280 --> 00:10:41.996 but my for clients collected which
00:10:41.996 --> 00:10:44.239 means I should be able to connect in.
00:10:44.240 --> 00:10:48.416 To RDP on something. So what I want
00:10:48.416 --> 00:10:52.506 to connect to 1st I get database from
00:10:52.506 --> 00:10:56.280 SQL so we should go to the Corp.
00:10:56.280 --> 00:10:57.788 Development Machines sequel be.
00:10:57.788 --> 00:11:00.959 Let's see if I can get a sequel be.
00:11:00.960 --> 00:11:02.844 I should disconnect from that and
00:11:02.844 --> 00:11:04.869 do it correctly the thing first.
00:11:04.870 --> 00:11:07.880 So edit it and let the admin.
00:11:07.880 --> 00:11:09.188 And no audio.
00:11:09.188 --> 00:11:11.368 Probably setting the need to
00:11:11.368 --> 00:11:13.820 like go back and restore.
00:11:13.820 --> 00:11:15.660 So back click on it.
00:11:19.400 --> 00:11:20.960 Open in this window.
00:11:31.230 --> 00:11:32.496 Where is the setting for that?
00:11:37.590 --> 00:11:39.036 No, not in a new window.
00:11:41.250 --> 00:11:46.400 But OK, fine, just do it.
00:11:46.400 --> 00:11:48.440 On full screen. Thank you,
00:11:48.440 --> 00:11:50.078 I don't want the full screen.
00:11:53.880 --> 00:11:54.550 OK.
00:11:56.780 --> 00:12:00.588 We do that. OK, we're in the box.
00:12:00.590 --> 00:12:02.814 This is sequel be and it is actually
00:12:02.814 --> 00:12:05.180 kind of full, so we should go run.
00:12:05.180 --> 00:12:06.848 I should run the clinically right
00:12:06.848 --> 00:12:08.910 at some point in the near future.
00:12:11.970 --> 00:12:13.518 After an SMS inside it's it's
00:12:13.518 --> 00:12:15.080 kind of urgent, but that's fine.
00:12:18.540 --> 00:12:21.861 Do I have a backup that I want like
00:12:21.861 --> 00:12:24.909 right here at the root? Oh, I do.
00:12:24.909 --> 00:12:27.027 That's what I want right there.
00:12:29.820 --> 00:12:31.584 At that one, 'cause that's really
00:12:31.584 --> 00:12:33.739 what I was coming here for anyway.
00:12:33.740 --> 00:12:38.024 The. We put that into your backups.
00:12:40.250 --> 00:12:41.839 While I'm at it, I'm gonna look
00:12:41.839 --> 00:12:43.074 through here real quick and
00:12:43.074 --> 00:12:44.324 just see if there's another
00:12:44.324 --> 00:12:45.780 copy of anything that would be.
00:12:45.780 --> 00:12:48.860 Super interested in grabbing.
00:12:48.860 --> 00:12:50.308 Think there is but.
00:12:52.320 --> 00:12:56.218 Septimal master from. February
00:12:56.218 --> 00:12:59.658 at the same time. How is March?
00:13:01.870 --> 00:13:05.020 So not quite, but OK, that's fine.
00:13:05.020 --> 00:13:06.770 What were they continue doing
00:13:06.770 --> 00:13:08.738 what I wanted? The other thing?
00:13:08.738 --> 00:13:10.880 OK, so tell me what I wanted.
00:13:10.880 --> 00:13:12.378 I don't actually need this other piece.
00:13:12.380 --> 00:13:13.228 You shouldn't do that.
00:13:15.720 --> 00:13:16.700 Get out of this now.
00:13:19.030 --> 00:13:20.788 Help me this window open anymore
00:13:20.788 --> 00:13:22.838 so I can close up right now.
00:13:22.840 --> 00:13:24.970 OK, so I'm going to shift
00:13:24.970 --> 00:13:26.870 right click copy as path,
00:13:26.870 --> 00:13:29.890 go into SSMS, restore database.
00:13:29.890 --> 00:13:32.760 Device had with the path on it.
00:13:32.760 --> 00:13:35.525 OK, changing the name because we were
00:13:35.525 --> 00:13:38.498 trying to use the newer format here.
00:13:49.060 --> 00:13:49.940 That's going to be fun.
00:13:52.150 --> 00:13:55.120 Get two of these, actually.
00:13:55.120 --> 00:13:59.920 Let's do this. It is.
00:13:59.920 --> 00:14:05.208 I'm gonna say clarity. Play 24 eight.
00:14:11.450 --> 00:14:12.770 8 local
00:14:15.780 --> 00:14:17.190 Now let's go to the end.
00:14:30.870 --> 00:14:32.510 Not what I wanted.
00:14:36.110 --> 00:14:39.740 Detach chests detach.
00:14:39.740 --> 00:14:44.580 OK. Asks the technical.
00:14:44.580 --> 00:14:47.009 Pass patch OK 'cause I wanna take
00:14:47.009 --> 00:14:49.066 that thing from that folder and
00:14:49.066 --> 00:14:51.680 put it in that folder that I want.
00:15:00.450 --> 00:15:00.910 Dave
00:15:06.460 --> 00:15:08.750 is it putting? This site
00:15:15.660 --> 00:15:16.130 put them.
00:15:20.370 --> 00:15:21.330 Set in from here.
00:15:26.970 --> 00:15:28.944 I would put him in here this
00:15:28.944 --> 00:15:30.630 where it is. Yes, I know.
00:15:35.180 --> 00:15:40.438 But here is where I wanted them to be.
00:15:50.560 --> 00:15:51.808 OK, and then I'm gonna wait
00:15:51.808 --> 00:15:52.870 and just copy this one.
00:15:56.320 --> 00:15:58.560 It 48.
00:16:03.200 --> 00:16:03.810 Son.
00:16:06.890 --> 00:16:09.103 I don't know if that's gonna work, but.
00:16:09.103 --> 00:16:15.520 Try. OK, so databases attach. Add.
00:16:15.520 --> 00:16:19.419 Go over to my data databases folder.
00:16:19.420 --> 00:16:20.932 Stratus, I don't know if this
00:16:20.932 --> 00:16:22.439 is going to work and try.
00:16:25.320 --> 00:16:27.690 Burlington message column for details.
00:16:36.130 --> 00:16:39.190 Yeah, 'cause it's looking at.
00:16:39.190 --> 00:16:41.080 One files, let's see if I can
00:16:41.080 --> 00:16:42.929 tell if it's correct fights.
00:16:47.650 --> 00:16:51.632 Yes, OK, so I just make sure I do that OK
00:16:51.632 --> 00:16:54.866 attach database at the Dean and local.
00:16:56.900 --> 00:16:58.730 Back please.
00:17:01.840 --> 00:17:07.910 That's correct. Basis. Touch.
00:17:07.910 --> 00:17:10.562 At this one, this one should
00:17:10.562 --> 00:17:14.250 need meaning. It says that. At.
00:17:17.210 --> 00:17:17.890 Play.
00:17:23.980 --> 00:17:25.569 Oh, it's already in there is the
00:17:25.569 --> 00:17:27.398 same name? Can I add it as a?
00:17:30.950 --> 00:17:37.780 Say. Option 3 on that. And OK.
00:17:46.350 --> 00:17:47.950 The file names OK, yeah,
00:17:47.950 --> 00:17:51.676 that's not gonna work. To do this,
00:17:51.676 --> 00:17:53.308 I'm going to just restore the
00:17:53.308 --> 00:17:55.057 database again from that other one.
00:18:02.300 --> 00:18:07.030 Do it pass. Already mystical.
00:18:09.860 --> 00:18:14.420 10-9 Local 24 eight.
00:18:16.470 --> 00:18:18.214 That's going to be the files for it,
00:18:18.220 --> 00:18:19.964 except that's not the folder path I want.
00:18:23.890 --> 00:18:24.730 That is.
00:18:31.720 --> 00:18:32.900 Daily we have these files
00:18:32.900 --> 00:18:33.844 here made for those.
00:18:42.660 --> 00:18:43.220 Skip.
00:18:46.080 --> 00:18:49.769 There it goes. OK, I have
00:18:49.769 --> 00:18:52.310 my sets in here that I want.
00:18:52.310 --> 00:18:54.325 So I can name these
00:18:54.325 --> 00:18:56.340 separately like what I need.
00:18:56.340 --> 00:18:59.132 Do is in this 2024 to 8 I'm
00:18:59.132 --> 00:19:01.189 going to manually add.
00:19:01.190 --> 00:19:03.998 These two pieces on the end of those things.
00:19:04.000 --> 00:19:05.101 I'm out here,
00:19:05.101 --> 00:19:07.303 I can even say local environment.
00:19:11.600 --> 00:19:17.170 There. Big Bear. There we go.
00:19:17.170 --> 00:19:18.670 Like it's used there and then,
00:19:18.670 --> 00:19:19.880 the environment lower gets used
00:19:19.880 --> 00:19:21.420 on that piece in that piece.
00:19:21.420 --> 00:19:23.170 I actually wanted to say like that.
00:19:30.050 --> 00:19:30.730 Off
00:19:37.740 --> 00:19:40.439 and then. So normally again,
00:19:40.439 --> 00:19:41.957 normally you would not be changing
00:19:41.957 --> 00:19:43.654 some of these things are doing this
00:19:43.654 --> 00:19:45.370 because it's a special case on this one.
00:19:45.370 --> 00:19:47.740 The other one will do it more or simply OK.
00:19:47.740 --> 00:19:49.864 This is going to install this stuff in here.
00:19:52.460 --> 00:19:53.890 We're not trying to resume.
00:19:53.890 --> 00:19:55.600 We're not trying to skip anything.
00:19:55.600 --> 00:19:56.740 Their version of that,
00:19:56.740 --> 00:19:58.450 and we're going to get changed.
00:20:00.680 --> 00:20:04.785 Uhm? And so that's going to go there.
00:20:04.790 --> 00:20:06.554 I don't need that running that's
00:20:06.554 --> 00:20:08.640 running and the fan is not running,
00:20:08.640 --> 00:20:10.705 so I'm going to tell Kibana startup.
00:20:14.590 --> 00:20:16.165 So that this thing can
00:20:16.165 --> 00:20:17.425 refresh and load correctly.
00:20:20.010 --> 00:20:22.779 Uhm? I don't think.
00:20:26.050 --> 00:20:27.828 This is what is Redis connect on?
00:20:30.560 --> 00:20:34.580 E 379 yeah. Ghost.
00:20:37.710 --> 00:20:41.090 It doesn't give you anything.
00:20:41.090 --> 00:20:44.690 Never expected. Ash.
00:20:50.150 --> 00:20:54.630 This. Spunky and. Then actually go in.
00:20:54.630 --> 00:20:56.250 Now it's going to remember my
00:20:56.250 --> 00:20:57.834 query from before going out and
00:20:57.834 --> 00:20:59.416 not returning it to be that way.
00:21:07.110 --> 00:21:10.484 OK, so minimize that man is that?
00:21:10.490 --> 00:21:15.470 The. Second here.
00:21:15.470 --> 00:21:18.578 I have my project now I configured
00:21:18.578 --> 00:21:21.899 that one for 2024 to 8 that file.
00:21:21.900 --> 00:21:24.070 Now I'm gonna go configure my 2021.1.
00:21:29.100 --> 00:21:30.801 Again, I have to rename the base
00:21:30.801 --> 00:21:32.876 off of it to there. The reason we
00:21:32.876 --> 00:21:34.640 do that is copying files back in.
00:21:34.640 --> 00:21:35.920 I don't want to accidentally
00:21:35.920 --> 00:21:37.420 overwrite the files that you've got,
00:21:37.420 --> 00:21:39.723 so I gave it a different name
00:21:39.723 --> 00:21:41.669 to prevent that breaking it.
00:21:41.670 --> 00:21:44.198 OK, so this one the local in here.
00:21:44.200 --> 00:21:45.952 I'm actually just keeping some stuff
00:21:45.952 --> 00:21:48.309 I'm not doing a course install here,
00:21:48.310 --> 00:21:51.166 so I'm leaving that at zero but it's
00:21:51.166 --> 00:21:53.590 all clarity local 30 Ventures Inc.
00:21:53.590 --> 00:21:55.366 We've got the names of the stuff that
00:21:55.366 --> 00:21:57.118 would be part of the course things,
00:21:57.120 --> 00:21:59.000 but it's not actually doing any of them.
00:21:59.000 --> 00:22:00.638 It's going to end up in clarity.
00:22:00.640 --> 00:22:01.580 Underscore 700 for local.
00:22:01.580 --> 00:22:02.520 All that stuff there.
00:22:02.520 --> 00:22:03.700 Not trying to skip anything,
00:22:03.700 --> 00:22:05.806 so we're just going to do all that stuff,
00:22:05.810 --> 00:22:07.690 so that part should be ready to go.
00:22:07.690 --> 00:22:09.100 I need an admin command prompt.
00:22:13.020 --> 00:22:18.200 Illustrator. I need to see d / 224 eight.
00:22:20.780 --> 00:22:22.556 Hey and then from here I
00:22:22.556 --> 00:22:24.200 can start my quicken setup,
00:22:24.200 --> 00:22:25.760 so let's see what happens.
00:22:25.760 --> 00:22:27.315 Hopefully I did everything well
00:22:27.315 --> 00:22:28.870 enough that this just works.
00:22:33.050 --> 00:22:34.835 OK, so it's saying you know, hey,
00:22:34.835 --> 00:22:36.620 there's stuff that's going to happen here.
00:22:36.620 --> 00:22:38.410 Make sure that it goes, you know,
00:22:38.410 --> 00:22:39.940 make sure you get your stuff,
00:22:39.940 --> 00:22:42.793 can fix there, and that you reach the file.
00:22:42.800 --> 00:22:44.036 It's going to read the file,
00:22:44.040 --> 00:22:45.531 pick up the settings the settings are
00:22:45.531 --> 00:22:47.126 going to tell it where to put stuff,
00:22:47.130 --> 00:22:50.928 and you can see inside this stuff there are.
00:22:50.930 --> 00:22:52.794 You know there's the folder path is detected,
00:22:52.800 --> 00:22:53.970 the mall it's putting them
00:22:53.970 --> 00:22:55.140 all in the right spots.
00:22:55.140 --> 00:22:57.246 Most of these are going to end the slashes,
00:22:57.250 --> 00:22:58.182 some of them don't.
00:22:58.182 --> 00:23:00.230 It's fine, it should be doing what
00:23:00.230 --> 00:23:02.330 it's supposed to be doing anyway.
00:23:02.330 --> 00:23:04.416 So we do that and that in
00:23:04.416 --> 00:23:06.259 the present key to continue.
00:23:06.260 --> 00:23:08.028 And then it it's the same warning I
00:23:08.028 --> 00:23:09.977 gave her before in the previous video.
00:23:09.980 --> 00:23:11.220 Never leave stuff conflicts on
00:23:11.220 --> 00:23:12.460 the client protection box ever.
00:23:12.460 --> 00:23:13.948 He has sensitive information in it.
00:23:16.050 --> 00:23:17.178 Make sure that you check out
00:23:17.178 --> 00:23:18.550 that stuff to the web directory.
00:23:18.550 --> 00:23:19.590 I have already done that,
00:23:19.590 --> 00:23:22.250 so it's already there.
00:23:22.250 --> 00:23:24.178 It says it's going to make this website
00:23:24.178 --> 00:23:26.276 inside my *** which that looks correct to me.
00:23:26.280 --> 00:23:28.174 That's what I wanted to do, which means
00:23:28.174 --> 00:23:29.359 that consider that part correctly.
00:23:29.360 --> 00:23:31.019 It's going to talk to that database,
00:23:31.020 --> 00:23:33.390 which is the one that I set up over here,
00:23:33.390 --> 00:23:35.770 so I think that's right.
00:23:35.770 --> 00:23:36.486 Dash 202048.
00:23:36.486 --> 00:23:38.276 Yep that looks all correct.
00:23:38.280 --> 00:23:40.854 It's going to use the SQL
00:23:40.854 --> 00:23:43.420 login account that I created.
00:23:43.420 --> 00:23:45.424 And it's going to be blank
00:23:45.424 --> 00:23:47.180 on there starts going fine.
00:23:47.180 --> 00:23:49.106 It's gonna set up a connection
00:23:49.106 --> 00:23:51.670 string for DNN to use that database,
00:23:51.670 --> 00:23:54.880 which is the correct name.
00:23:54.880 --> 00:23:57.144 It's going to now start actually running the
00:23:57.144 --> 00:23:59.519 install so it creates like the images folder.
00:23:59.520 --> 00:24:01.550 Then it's going to start creating like.
00:24:01.550 --> 00:24:03.000 Make sure that there is,
00:24:03.000 --> 00:24:04.096 you know.
00:24:04.096 --> 00:24:05.740 Updated get runs.
00:24:05.740 --> 00:24:08.548 It's going to copy config files
00:24:08.548 --> 00:24:11.520 in and populate them with the
00:24:11.520 --> 00:24:14.030 values from our settings file.
00:24:14.030 --> 00:24:16.200 From our bat settings file and then
00:24:16.200 --> 00:24:18.125 start running builds and all kinds of
00:24:18.125 --> 00:24:20.189 crazy stuff so we can see if it runs.
00:24:20.190 --> 00:24:21.530 It was all of them.
00:24:21.530 --> 00:24:23.610 Any of this fails where we try to
00:24:23.610 --> 00:24:25.817 resume from the stuff that it failed at.
00:24:25.820 --> 00:24:27.428 So far it's doing really well.
00:24:46.020 --> 00:24:48.365 Really well so far. This is Barbara.
00:24:48.370 --> 00:24:51.450 It might get stuck because the Visual Studio
00:24:51.450 --> 00:24:54.076 build tools may not go all the way in.
00:25:25.660 --> 00:25:27.175 Really worried that this part
00:25:27.175 --> 00:25:29.270 was going to happen and break it.
00:25:29.270 --> 00:25:31.538 While we're waiting, I will go ahead
00:25:31.538 --> 00:25:33.996 and look at that file and see if.
00:25:34.000 --> 00:25:35.745 I can run that separately
00:25:35.745 --> 00:25:37.490 before running this part again.
00:25:56.450 --> 00:25:58.088 This part has been getting stuck.
00:26:01.460 --> 00:26:03.399 Still waiting for the installer log file.
00:26:08.370 --> 00:26:10.490 It is part of the reason you have
00:26:10.490 --> 00:26:12.483 an admin commands and hurt you
00:26:12.483 --> 00:26:17.100 some stuff. I'm going to. Seacoal
00:26:26.550 --> 00:26:28.510 best because I don't think it's gonna work.
00:26:32.660 --> 00:26:35.530 Since that died. We know that's problematic,
00:26:35.530 --> 00:26:37.789 so I'm not writing this by itself over here.
00:26:51.780 --> 00:26:52.708 Previously, like when you
00:26:52.708 --> 00:26:54.316 would run this thing, it would
00:26:54.316 --> 00:26:56.344 always give you stuff in here.
00:26:56.350 --> 00:26:57.670 And it was never like a big deal.
00:26:59.790 --> 00:27:01.800 Tell of the build tools to
00:27:01.800 --> 00:27:03.476 a specific spot there maybe
00:27:03.476 --> 00:27:05.310 I need to go look at it.
00:27:05.310 --> 00:27:07.326 Once you have it run once
00:27:07.326 --> 00:27:08.670 like for like legitimately,
00:27:08.670 --> 00:27:10.686 it's generally going to be fine.
00:27:10.690 --> 00:27:12.370 It's just yeah stuck again.
00:27:14.580 --> 00:27:16.505 I'm gonna run this is Mr myself.
00:27:22.070 --> 00:27:23.050 See what it does.
00:27:25.120 --> 00:27:27.384 Should be should be making like a log
00:27:27.384 --> 00:27:29.620 file or something but. I get anything.
00:27:40.940 --> 00:27:42.488 Studio installer usually
00:27:42.488 --> 00:27:45.068 search to show this afterward.
00:27:56.830 --> 00:27:57.880 I read it over and over.
00:28:00.980 --> 00:28:01.480 Song.
00:28:09.060 --> 00:28:11.976 Install movie start quiet. You should
00:28:11.976 --> 00:28:14.730 use setup bootstrapper doing something.
00:28:25.190 --> 00:28:26.630 Yeah, I think this is the
00:28:26.630 --> 00:28:28.129 this is the command line but.
00:28:32.760 --> 00:28:34.867 This it doesn't give you any help
00:28:34.867 --> 00:28:36.655 with file like it's originally
00:28:36.655 --> 00:28:39.130 like it originally did. Kill it.
00:29:03.870 --> 00:29:08.744 Search everything to do something. I think
00:29:08.744 --> 00:29:11.200 maybe it isn't like the ones I've got.
00:29:21.470 --> 00:29:23.096 Give me the visual clearance store.
00:29:32.190 --> 00:29:34.304 This thing is running it over here.
00:29:34.310 --> 00:29:35.558 Hope that's disappeared.
00:29:37.690 --> 00:29:41.140 That disappeared. Elf
00:29:44.770 --> 00:29:46.110 Batman sure.
00:29:48.790 --> 00:29:49.522 There it goes.
00:29:49.522 --> 00:29:51.230 OK, so Visual Studio build tools 2017.
00:29:51.230 --> 00:29:52.374 That's what you were.
00:29:52.374 --> 00:29:54.901 I'm excited to see to show up in here
00:29:54.901 --> 00:29:57.250 as long as that's there I think we're OK.
00:29:57.250 --> 00:29:59.336 And then I can just tell it
00:29:59.336 --> 00:30:01.109 to skip those tools back.
00:30:01.110 --> 00:30:03.048 Yeah, I can just tell it.
00:30:03.050 --> 00:30:04.010 Skip those tools.
00:30:06.140 --> 00:30:09.990 Hey. I'm just a quick set up,
00:30:09.990 --> 00:30:14.270 I need the. Iams. Space.
00:30:14.270 --> 00:30:16.926 OK, So what we're doing is skip the
00:30:16.926 --> 00:30:19.850 NPM build tools, which is set to 1.
00:30:23.180 --> 00:30:25.466 Then, well, just close all those,
00:30:25.470 --> 00:30:27.756 but I continue these settings still.
00:30:29.820 --> 00:30:31.396 I want to resume.
00:30:31.396 --> 00:30:33.366 From step 15 and 16,
00:30:33.370 --> 00:30:37.290 so I'm gonna resume from step 15.
00:30:37.290 --> 00:30:40.566 So that it doesn't just start over.
00:30:40.570 --> 00:30:41.710 Go back in and see.
00:30:41.710 --> 00:30:43.974 This is resuming from 15 and it goes
00:30:43.974 --> 00:30:46.249 directly to 15 and it starts from there.
00:30:46.250 --> 00:30:47.606 And they sold it to skip
00:30:47.606 --> 00:30:48.510 the Indian build tools.
00:30:48.510 --> 00:30:50.134 It just did the that part even says
00:30:50.134 --> 00:30:51.667 that it's skipping it right there.
00:30:54.060 --> 00:30:55.460 And so it was going to do.
00:30:55.460 --> 00:30:56.460 The regular would be built.
00:31:02.980 --> 00:31:04.290 Do they know I'm gonna need the best with it?
00:31:07.120 --> 00:31:08.900 Had a jump over to.
00:31:11.720 --> 00:31:14.762 ****. Figure 2 Skippy Indian
00:31:14.762 --> 00:31:16.027 build tools from right there.
00:31:20.210 --> 00:31:21.040 Save, it just keeps going.
00:31:21.040 --> 00:31:22.036 It gets all the way through.
00:31:27.150 --> 00:31:30.752 Later to go build. It's doing
00:31:30.752 --> 00:31:32.348 the clarity skin is even though
00:31:32.348 --> 00:31:34.010 it's all caps. It's it's fine.
00:31:42.140 --> 00:31:43.430 Filling everything.
00:32:05.120 --> 00:32:05.720 If I had.
00:32:23.140 --> 00:32:25.410 Hey, it's pulling you get.
00:32:25.410 --> 00:32:27.853 It's going to run the new get
00:32:27.853 --> 00:32:29.970 restore against the solution file.
00:32:29.970 --> 00:32:31.629 As if you had like open Visual
00:32:31.629 --> 00:32:32.979 Studio and running it yourself.
00:32:43.610 --> 00:32:45.270 Build yourself inside Visual Studio.
00:32:48.140 --> 00:32:48.930 Enterprise resource.
00:32:52.250 --> 00:32:54.680 It is reading.
00:32:54.680 --> 00:32:57.440 On top of these things so.
00:32:57.440 --> 00:32:59.288 If there's a problem, I can get like,
00:32:59.290 --> 00:33:00.670 here's the new get restore problems,
00:33:00.670 --> 00:33:02.056 and then there's the build log,
00:33:02.060 --> 00:33:03.428 so it's it's creating some files
00:33:03.428 --> 00:33:05.305 here in case you need to go back
00:33:05.305 --> 00:33:06.673 in like something that was wrong.
00:33:20.160 --> 00:33:22.158 You know, like a long pause it 19 B
00:33:22.158 --> 00:33:24.495 is normal or we see like I admit date.
00:33:24.500 --> 00:33:26.660 If you come over to me say like why is
00:33:26.720 --> 00:33:28.808 it taking so long it's got stuck I'm
00:33:28.808 --> 00:33:30.794 like well I told you right there in
00:33:30.794 --> 00:33:33.034 the file that a long pause is normal
00:33:33.034 --> 00:33:35.960 so long toss it normal. Select me
00:34:00.650 --> 00:34:04.706 hey, now that it has the database there.
00:34:04.710 --> 00:34:07.188 It's trying to populate the schema using
00:34:07.188 --> 00:34:10.327 the EF stuff will see if that goes through.
00:34:10.330 --> 00:34:13.320 It looks like it failed.
00:34:13.320 --> 00:34:17.177 Or soon as a tablet lanes OK.
00:34:17.180 --> 00:34:19.076 So what happened?
00:34:19.076 --> 00:34:21.026 Check schema, not log.
00:34:21.026 --> 00:34:23.084 There's probably had that I didn't
00:34:23.084 --> 00:34:25.546 assign the user to the database, yeah?
00:34:25.546 --> 00:34:27.426 I have the right user,
00:34:27.430 --> 00:34:28.540 but the user does not allow
00:34:28.540 --> 00:34:29.959 it to work to that database,
00:34:29.960 --> 00:34:32.920 so I need to give it the security to do that.
00:34:32.920 --> 00:34:35.143 So I go to log in inside of SQL,
00:34:35.150 --> 00:34:36.866 Login properties user mapping and I
00:34:36.866 --> 00:34:39.256 got the two step ones and then I make
00:34:39.256 --> 00:34:41.332 sure that it will come and ask SQL log
00:34:41.332 --> 00:34:43.670 in and give a DB owner on both of those.
00:34:43.670 --> 00:34:46.560 I need to do that one too to the demon
00:34:46.560 --> 00:34:48.686 ones too, but I need to make sure that
00:34:48.686 --> 00:34:50.038 they don't already have a sequel.
00:34:50.040 --> 00:34:51.920 Login in them from the Restore is that
00:34:51.920 --> 00:34:55.710 they do have to get rid of it, yeah?
00:34:55.710 --> 00:34:59.430 And. Yep.
00:34:59.430 --> 00:35:00.600 Now I've removed those two.
00:35:00.600 --> 00:35:02.930 I can go in and do it to this one,
00:35:02.930 --> 00:35:04.379 but you can't assign it from another
00:35:04.379 --> 00:35:06.327 one at the same time and they are
00:35:06.327 --> 00:35:07.347 considered two separate ones,
00:35:07.350 --> 00:35:10.800 which is really dumb. Annoying.
00:35:13.250 --> 00:35:13.910 Oh
00:35:18.490 --> 00:35:20.080 I'm not getting into server rule,
00:35:20.080 --> 00:35:20.932 it's anything special.
00:35:20.932 --> 00:35:22.636 It's going to have direct rights
00:35:22.636 --> 00:35:24.167 against databases at the same time
00:35:24.167 --> 00:35:25.909 here because I'm doing the same thing.
00:35:25.910 --> 00:35:27.765 I'm going to network service the same
00:35:27.765 --> 00:35:29.054 permission, so those four databases
00:35:29.054 --> 00:35:31.479 and I know it's not in that other one,
00:35:31.480 --> 00:35:33.908 so it's definitely be.
00:35:33.910 --> 00:35:35.274 Helpful at once here.
00:35:35.274 --> 00:35:37.320 Needs to be on or off.
00:35:42.220 --> 00:35:43.924 So I'll give it that so that next
00:35:43.924 --> 00:35:45.420 service goes into all four of them.
00:35:53.720 --> 00:35:55.316 That's what RIS is running at.
00:35:55.320 --> 00:35:56.388 This is network service.
00:36:00.290 --> 00:36:03.307 Yeah, OK, so I'm clear the log.
00:36:05.410 --> 00:36:09.234 And now we need to resume at 20.
00:36:09.240 --> 00:36:11.688 So we go back over here we're gonna
00:36:11.688 --> 00:36:14.020 reopen the settings file. Exam.
00:36:16.900 --> 00:36:18.925 This is why I added the resume feature to
00:36:18.925 --> 00:36:20.753 this thing so that because if something
00:36:20.753 --> 00:36:22.769 goes wrong you get right back into it.
00:36:22.770 --> 00:36:25.137 Hey gonna resume 20 and go to start trying
00:36:25.137 --> 00:36:27.853 to figure out if you can populate stuff now.
00:36:27.860 --> 00:36:29.876 One of these tensions that I had
00:36:29.876 --> 00:36:31.890 for Visual Studio code was to go
00:36:31.890 --> 00:36:33.516 in and have tail log monitoring.
00:36:33.520 --> 00:36:35.530 It doesn't work exactly right.
00:36:35.530 --> 00:36:37.336 But if I bring it in here.
00:36:43.400 --> 00:36:48.798 Log viewer. I'll go follow tail.
00:36:48.800 --> 00:36:52.150 Resulted in an error, awesome.
00:36:52.150 --> 00:36:53.974 Love your toggle box.
00:36:53.974 --> 00:36:55.769 Great that. Extension is broken.
00:37:02.050 --> 00:37:04.798 Oh, it is doing it, sort of like it's
00:37:04.798 --> 00:37:06.980 kind of refreshing the files it goes.
00:37:06.980 --> 00:37:11.164 You can't do this with notepad++ because it.
00:37:11.170 --> 00:37:13.830 The file gets to be too big and nobody was.
00:37:13.830 --> 00:37:18.160 Plus freaks out on it. OK.
00:37:18.160 --> 00:37:20.128 So that finished this with the
00:37:20.128 --> 00:37:22.319 schema ran all the way through.
00:37:22.320 --> 00:37:23.760 And then finished it and it has a
00:37:23.760 --> 00:37:25.317 big fat warning that says warning.
00:37:25.320 --> 00:37:26.598 This is not inject. See data.
00:37:26.600 --> 00:37:28.098 Use the unit test to do that.
00:37:28.100 --> 00:37:29.378 I have not automated that piece.
00:37:29.380 --> 00:37:32.600 You have to do that manually still.
00:37:32.600 --> 00:37:34.514 Next thing goes through and tries
00:37:34.514 --> 00:37:36.122 to create everything you would
00:37:36.122 --> 00:37:37.724 need for the website in IIS.
00:37:37.730 --> 00:37:40.747 So in IIS I should now see.
00:37:40.750 --> 00:37:42.330 I opened my eyes again,
00:37:42.330 --> 00:37:44.238 an independent test because
00:37:44.238 --> 00:37:46.146 it wasn't pinned yet.
00:37:46.150 --> 00:37:49.108 My pin pin it not understand.
00:37:49.110 --> 00:37:53.205 I should see there's my new website.
00:37:53.210 --> 00:37:54.580 It's there, it's already created.
00:37:54.580 --> 00:37:56.524 It's got all the apples that
00:37:56.524 --> 00:37:58.989 I need for my basic website.
00:37:58.990 --> 00:38:02.420 Excuse me and it put them into here with
00:38:02.420 --> 00:38:04.190 the correct connection configurations for 24,
00:38:04.190 --> 00:38:04.454 eight.
00:38:04.454 --> 00:38:06.566 All that stuff is there by images folder.
00:38:06.570 --> 00:38:08.362 Is there so that I have my image
00:38:08.362 --> 00:38:09.776 imports and everything that points
00:38:09.776 --> 00:38:11.606 to this folder that it created?
00:38:11.610 --> 00:38:14.186 All that stuff is in there and
00:38:14.186 --> 00:38:16.520 it's all ready to be awesome.
00:38:16.520 --> 00:38:17.745 Since this is first time set up,
00:38:17.750 --> 00:38:19.622 so there's a couple other things
00:38:19.622 --> 00:38:21.670 that are not going to work yet.
00:38:21.670 --> 00:38:24.856 It even included a SSL certificate
00:38:24.856 --> 00:38:28.575 for my Web dev website so that
00:38:28.575 --> 00:38:31.539 I could run it and HTTPS.
00:38:31.540 --> 00:38:35.586 Which is also awesome, so there's that.
00:38:35.590 --> 00:38:39.180 So a thing that I know that I need to do.
00:38:39.180 --> 00:38:41.245 That is not part of the thing,
00:38:41.250 --> 00:38:45.594 but it is in the guide of instructions.
00:38:45.600 --> 00:38:47.910 Is I need to set the servers
00:38:47.910 --> 00:38:50.139 on my local here to allow.
00:38:50.140 --> 00:38:51.100 The.
00:38:55.140 --> 00:38:58.506 The app settings for Web server.
00:39:01.200 --> 00:39:04.440 Yeah, it's scary I.
00:39:06.720 --> 00:39:08.980 Don't remember where it is.
00:39:14.700 --> 00:39:15.673 I may have to let you look
00:39:15.673 --> 00:39:16.588 at the guide for this one,
00:39:16.590 --> 00:39:18.612 'cause I don't remember this. Allow.
00:39:18.612 --> 00:39:22.756 No baby, check this part here now.
00:39:22.760 --> 00:39:26.162 I'm reading the 24 to 8 years so allow.
00:39:26.170 --> 00:39:28.070 Oh yes, Web server rewrite,
00:39:28.070 --> 00:39:29.582 allowed server variables.
00:39:29.582 --> 00:39:32.606 Oh, I haven't installed rewrite yet.
00:39:32.610 --> 00:39:36.140 We have to do that so if I come here,
00:39:36.140 --> 00:39:37.910 get new web platform components,
00:39:37.910 --> 00:39:39.524 install this extension,
00:39:39.524 --> 00:39:41.676 you run the installer.
00:39:41.680 --> 00:39:44.320 It asks for admin rights.
00:39:44.320 --> 00:39:45.830 So give the admin rights.
00:39:49.160 --> 00:39:50.240 Theoretically, after doing that,
00:39:50.240 --> 00:39:52.429 you're supposed to be able to click this
00:39:52.429 --> 00:39:53.995 and it just automatically goes again,
00:39:54.000 --> 00:39:55.638 but lately it's just been reopening
00:39:55.638 --> 00:39:57.767 it so you have to do it manually.
00:39:57.770 --> 00:39:59.110 So like web platform installer
00:39:59.110 --> 00:40:00.182 inside your start menu.
00:40:02.850 --> 00:40:05.360 And then once you're here.
00:40:05.360 --> 00:40:07.726 You can get the rewrite tool installed.
00:40:09.790 --> 00:40:14.510 Search for it so you are elderly, right?
00:40:14.510 --> 00:40:18.870 It's the one for 2017, so install it. Except.
00:40:22.280 --> 00:40:23.240 Open quickly.
00:40:42.320 --> 00:40:46.114 Do you finish and exit? Can I ask?
00:40:46.114 --> 00:40:47.106 Probably don't need to,
00:40:47.110 --> 00:40:48.839 but I'm going to get the money.
00:40:51.110 --> 00:40:52.610 So at the root here,
00:40:52.610 --> 00:40:53.210 configuration editor,
00:40:53.210 --> 00:40:54.710 app settings, web server rewrite,
00:40:54.710 --> 00:40:56.510 that's what I was looking for.
00:40:56.510 --> 00:40:58.670 That's why I could see
00:40:58.670 --> 00:41:00.398 'cause it wasn't there.
00:41:00.400 --> 00:41:02.950 Scared me that window smaller.
00:41:02.950 --> 00:41:05.029 And I need to copy these two
00:41:05.029 --> 00:41:07.200 names and add them to the list.
00:41:07.200 --> 00:41:08.600 With them in here on a client
00:41:08.600 --> 00:41:10.019 or like a production box,
00:41:10.020 --> 00:41:11.195 you could only put these
00:41:11.195 --> 00:41:12.370 directly in the website config,
00:41:12.370 --> 00:41:13.866 not the machine config,
00:41:13.866 --> 00:41:16.470 which is what I'm doing right now.
00:41:16.470 --> 00:41:18.286 So I got these two in the machine
00:41:18.286 --> 00:41:20.156 config now so I could just have all
00:41:20.156 --> 00:41:21.840 my websites do this automatically.
00:41:21.840 --> 00:41:23.110 And after you change that
00:41:23.110 --> 00:41:24.126 at the machine level,
00:41:24.130 --> 00:41:26.154 you would need to run like an iisreset.
00:41:28.210 --> 00:41:30.210 So I'm gonna go ahead and just do 'cause I
00:41:30.264 --> 00:41:33.670 have an admin account right here, I reset.
00:41:33.670 --> 00:41:35.189 So stop small brings them back up.
00:41:49.210 --> 00:41:51.180 Yeah, let's back up OK.
00:41:51.180 --> 00:41:53.142 So my website should inherit that
00:41:53.142 --> 00:41:56.037 change now and I don't have to manually
00:41:56.037 --> 00:41:58.311 put it on every individual website.
00:41:58.320 --> 00:41:59.850 But yeah, the website should
00:41:59.850 --> 00:42:01.380 just run now in theory.
00:42:01.380 --> 00:42:03.746 One more change I need to make.
00:42:03.750 --> 00:42:05.358 Is I want to take the binding here.
00:42:07.440 --> 00:42:08.352 Need to grab the name and
00:42:08.352 --> 00:42:09.359 I need to put the name.
00:42:09.360 --> 00:42:10.400 It's the portal aliases table
00:42:10.400 --> 00:42:11.850 and some of the things I have
00:42:11.850 --> 00:42:12.960 not been able to automate yet.
00:42:12.960 --> 00:42:17.584 So for 8 tables for DNN I want
00:42:17.584 --> 00:42:21.280 the portal alias table edit.
00:42:21.280 --> 00:42:24.885 I can remove all these other bills.
00:42:24.890 --> 00:42:27.075 Games from that which might
00:42:27.075 --> 00:42:28.823 keep this one here.
00:42:28.830 --> 00:42:29.755 Again, this is the primary
00:42:29.755 --> 00:42:30.939 is the only one I'm worried
00:42:30.939 --> 00:42:32.247 about having on my local here,
00:42:32.250 --> 00:42:34.260 so this is just that's just going to be it.
00:42:36.840 --> 00:42:39.128 At the same time, I'm going to check
00:42:39.128 --> 00:42:41.410 the portal aliases table for this one.
00:42:41.410 --> 00:42:43.810 And run that. And this one just needs
00:42:43.810 --> 00:42:46.083 to have my local clearly demos.com
00:42:46.083 --> 00:42:48.959 'cause that's what that was going to be,
00:42:48.960 --> 00:42:51.208 and so I'm sure all those other ones.
00:42:51.210 --> 00:42:52.620 And it is the primary,
00:42:52.620 --> 00:42:54.790 so one, so there's that.
00:42:54.790 --> 00:42:56.519 Before he then runs it that way,
00:42:56.520 --> 00:42:59.840 I can solve it, but I can do that later.
00:42:59.840 --> 00:43:00.905 So that's taken care of
00:43:00.905 --> 00:43:01.970 in our website is there?
00:43:01.970 --> 00:43:03.368 I didn't have to manually create
00:43:03.368 --> 00:43:04.715 these apples or anything that that
00:43:04.715 --> 00:43:06.017 file to care of all that stuff.
00:43:06.020 --> 00:43:07.780 Let's see what happens when
00:43:07.780 --> 00:43:10.260 I try to run the website.
00:43:10.260 --> 00:43:11.190 The tools.
00:43:15.540 --> 00:43:17.475 It's going to wake up to it in first
00:43:17.475 --> 00:43:19.197 and then figure some stuff out.
00:43:19.200 --> 00:43:21.660 It's doing it in GPS.
00:43:21.660 --> 00:43:22.620 It says this application
00:43:22.620 --> 00:43:24.060 to the site is not secure,
00:43:24.060 --> 00:43:26.700 but it's kind of like spinning up so
00:43:26.700 --> 00:43:29.226 we're gonna let it do its thing first.
00:43:29.230 --> 00:43:32.488 It says it's connected and secure.
00:43:32.490 --> 00:43:33.813 It's gotten updated.
00:43:33.813 --> 00:43:35.136 Very common streamer.
00:43:35.140 --> 00:43:36.916 Image there I actually kind of
00:43:36.916 --> 00:43:39.051 need to grab the older one for
00:43:39.051 --> 00:43:40.815 this I get rid of initiator.
00:43:40.820 --> 00:43:43.140 I don't need to type.
00:43:43.140 --> 00:43:44.480 Do you want method?
00:43:44.480 --> 00:43:47.010 And I do want the response header
00:43:47.010 --> 00:43:49.200 content encoding 'cause I want
00:43:49.200 --> 00:43:51.610 to see the compression working.
00:43:51.610 --> 00:43:52.890 Marvel could be more narrow,
00:43:52.890 --> 00:43:53.146 narrow,
00:43:53.146 --> 00:43:54.682 some stuff else would want to
00:43:54.682 --> 00:43:56.220 have it take up some space.
00:43:59.270 --> 00:44:03.358 There. So like that.
00:44:03.360 --> 00:44:06.027 Another thing that I know I need
00:44:06.027 --> 00:44:08.680 to install is. Install brotli.
00:44:11.390 --> 00:44:12.950 Because it's a new compression format
00:44:12.950 --> 00:44:14.780 that works really well and is really
00:44:14.780 --> 00:44:16.288 awesome right there. Release for it.
00:44:19.320 --> 00:44:20.250 Source code.
00:44:23.010 --> 00:44:25.188 South talking yes.
00:44:27.340 --> 00:44:29.698 Julie birthday compression in my ***.
00:44:32.360 --> 00:44:35.780 Open source, probably plugin for IIS.
00:44:35.780 --> 00:44:39.600 It's the one that I was just on, I think.
00:44:39.600 --> 00:44:41.346 Open up, that's the this one.
00:44:41.350 --> 00:44:46.410 OK so release. Zip file.
00:44:46.410 --> 00:44:50.260 Zip only one. You're building a
00:44:50.260 --> 00:44:51.660 Fort version of the encoders,
00:44:51.660 --> 00:44:53.060 with the officials now includes
00:44:53.060 --> 00:44:54.442 the Mississippi, sees performance
00:44:54.442 --> 00:44:56.086 patches from Google Broccoli.
00:44:56.090 --> 00:44:57.098 So maybe this is.
00:44:57.098 --> 00:44:59.549 I know I had an installer for this thing.
00:44:59.550 --> 00:45:01.140 I mean I shared in teams
00:45:01.140 --> 00:45:01.935 meeting Craig search.
00:45:01.940 --> 00:45:03.008 Did you find it?
00:45:17.980 --> 00:45:21.140 OK, so there's two things that I want
00:45:21.140 --> 00:45:24.480 to do with it. Don't have right now.
00:45:28.010 --> 00:45:29.708 There are no. These are instructions
00:45:29.708 --> 00:45:31.469 of doing an extra thing here.
00:45:31.470 --> 00:45:35.630 Checks in on. In your rewrite rules,
00:45:35.630 --> 00:45:37.780 there's the allowed server variables.
00:45:37.780 --> 00:45:39.322 HTTP accept encoding is a thing
00:45:39.322 --> 00:45:41.462 that we want to add to the other
00:45:41.462 --> 00:45:43.040 variables that I just added to.
00:45:43.040 --> 00:45:45.136 So add that in. I ask for work.
00:45:47.450 --> 00:45:48.575 Search file figuration,
00:45:48.575 --> 00:45:50.075 Edgar these those two.
00:45:50.080 --> 00:45:52.330 I'm going to add one more,
00:45:52.330 --> 00:45:55.540 which is HTP accepted coding apply.
00:45:55.540 --> 00:45:59.758 Back to the site off. OK and then.
00:45:59.758 --> 00:46:03.860 I need it added the rewrite rule.
00:46:03.860 --> 00:46:06.446 It says to prioritize Brightleaf can.
00:46:12.500 --> 00:46:14.848 So that and then.
00:46:17.130 --> 00:46:20.436 Want that in my solution items.
00:46:20.440 --> 00:46:22.438 Rewrite rules should really add that
00:46:22.438 --> 00:46:24.730 to like the default in your images.
00:46:27.200 --> 00:46:30.060 View my whitespace and tab.
00:46:35.680 --> 00:46:40.615 Notes. He said setting to Q spaces.
00:46:40.620 --> 00:46:45.280 Language to place my space close. Is that?
00:46:48.110 --> 00:46:50.598 Two spaces at 4:00 and I just mainly.
00:46:52.640 --> 00:46:56.680 OK. So we're going to
00:46:56.680 --> 00:46:58.135 prioritize Bradley there.
00:46:58.140 --> 00:47:00.459 It's senedy Andrew.
00:47:00.459 --> 00:47:04.570 Just put there. Should.
00:47:04.570 --> 00:47:07.360 Look at the one inside there.
00:47:07.360 --> 00:47:10.590 Is that comes from yeah.
00:47:10.590 --> 00:47:11.598 Where is Bradley?
00:47:13.760 --> 00:47:16.182 OK, so yeah, we'll do that and
00:47:16.182 --> 00:47:18.880 then I'm going to put that into
00:47:18.880 --> 00:47:20.812 the default config. But he's.
00:47:20.812 --> 00:47:23.650 So people are gonna get new **** here.
00:47:25.660 --> 00:47:32.079 Not that that. That's. The standard ones.
00:47:36.100 --> 00:47:37.000 That one.
00:47:39.030 --> 00:47:43.068 Their testing 1 doesn't do that.
00:47:43.070 --> 00:47:49.608 In 2021 Nope. Nope, Nope.
00:47:49.610 --> 00:47:52.698 That air standard one.
00:47:55.820 --> 00:47:58.156 Testing doesn't have it.
00:47:58.156 --> 00:48:00.680 Gray that will tell it
00:48:00.680 --> 00:48:02.135 to prioritize brightly.
00:48:02.140 --> 00:48:03.810 You know it's it's just.
00:48:03.810 --> 00:48:05.475 It's a newer comparison method
00:48:05.475 --> 00:48:07.140 that came out more recently.
00:48:07.140 --> 00:48:08.800 That's that's stronger than deflator.
00:48:08.800 --> 00:48:11.728 A couple of those other ones.
00:48:11.730 --> 00:48:13.848 So it's a better performance overall.
00:48:22.570 --> 00:48:23.560 10 00:48:26.540 --> 00:48:28.828 Why Ares I don't want just a binary.
00:48:28.830 --> 00:48:29.970 They actually had installer.
00:49:08.260 --> 00:49:09.930 Microsoft is recommending it too.
00:49:27.780 --> 00:49:28.650 It's really not.
00:49:33.650 --> 00:49:36.200 The output file I thought
00:49:36.200 --> 00:49:38.208 it had. It's in the file.
00:49:44.790 --> 00:49:48.790 Set up the pie and stuff, but.
00:49:48.790 --> 00:49:50.500 This is like you need to
00:49:50.500 --> 00:49:52.269 build it and I'm like no.
00:49:52.270 --> 00:49:54.944 I know that this thing can be.
00:49:54.950 --> 00:49:57.218 Installed with installer.
00:50:08.610 --> 00:50:10.116 Discontinued because they
00:50:10.116 --> 00:50:13.630 want to to go to another one.
00:50:13.630 --> 00:50:15.013 Connection refused OK,
00:50:15.013 --> 00:50:16.857 so that's not helpful.
00:50:30.280 --> 00:50:31.020 Download.
00:50:34.620 --> 00:50:35.928 Russian scheme plugin.
00:50:38.880 --> 00:50:40.320 Since I have some math so.
00:50:42.500 --> 00:50:44.440 That just take me to this page and that's it.
00:50:54.590 --> 00:50:55.970 OK, let's try this.
00:51:16.040 --> 00:51:18.329 OK so I will try this then.
00:51:27.450 --> 00:51:28.080 This.
00:51:33.550 --> 00:51:34.110 All.
00:51:36.250 --> 00:51:39.799 Thing I guess it's installing the thing.
00:51:39.800 --> 00:51:40.927 And then it's turning it back on.
00:51:44.290 --> 00:51:46.350 Enable Brotli in there.
00:51:52.300 --> 00:51:55.240 I think that's what I want.
00:51:57.940 --> 00:52:02.538 I'm. What that should do if I
00:52:02.538 --> 00:52:05.678 refresh this page? CBR as a gzip.
00:52:05.678 --> 00:52:08.300 Some of the stuff. Yep, there's BR.
00:52:10.860 --> 00:52:11.780 Saw ABR.
00:52:16.520 --> 00:52:17.600 Is that stopping the pain?
00:52:17.600 --> 00:52:19.320 But I did see a PR which is.
00:52:22.660 --> 00:52:23.350 What's this song?
00:52:25.860 --> 00:52:26.800 The types.
00:52:30.110 --> 00:52:33.659 Seth does not want to lose something.
00:52:33.660 --> 00:52:35.343 Let's get let's clean some of this up here.
00:52:35.350 --> 00:52:38.230 I got too many things open.
00:52:38.230 --> 00:52:40.399 Cleared that one.
00:52:40.400 --> 00:52:41.892 Take care of that.
00:52:41.892 --> 00:52:44.130 Bond is running in the background.
00:52:44.130 --> 00:52:45.278 I told me that.
00:52:47.810 --> 00:52:50.225 That stuff is kind of just there.
00:52:50.230 --> 00:52:51.690 Tell me that particular folder,
00:52:51.690 --> 00:52:53.394 I mean really that one folder
00:52:53.394 --> 00:52:54.890 I'm gonna keep one open.
00:53:02.980 --> 00:53:05.864 So this stuff is going into my
00:53:05.864 --> 00:53:08.538 windows problem. There down there.
00:53:10.640 --> 00:53:10.980 Add.
00:53:15.160 --> 00:53:18.160 What type was it not able to load?
00:53:18.160 --> 00:53:21.346 Is the question open Visual Studio?
00:53:21.350 --> 00:53:23.276 I'm going to take a look at that stuff.
00:53:23.280 --> 00:53:25.128 When I close that schema log and
00:53:25.128 --> 00:53:27.099 I'm going to open the workspace.
00:53:27.100 --> 00:53:28.932 If you want to close this and run
00:53:28.932 --> 00:53:30.908 it from there because I need to
00:53:30.908 --> 00:53:32.590 make sure that it associates my.
00:53:32.590 --> 00:53:36.938 Workspace files with that.
00:53:36.940 --> 00:53:42.230 So workspace. It yeah.
00:53:42.230 --> 00:53:43.270 It picked up everything.
00:53:43.270 --> 00:53:44.570 All that stuff is good.
00:53:58.200 --> 00:53:59.400 Solution is the app settings.
00:53:59.400 --> 00:54:01.066 What did it get for app settings?
00:54:01.070 --> 00:54:02.206 It is anything wrong?
00:54:02.206 --> 00:54:04.300 Well there's a double slash in there.
00:54:04.300 --> 00:54:07.820 Let's fix that. I mean there like
00:54:07.820 --> 00:54:09.245 weird double slash type stuff.
00:54:13.410 --> 00:54:16.860 Local, Yep, missing the dot.
00:54:16.860 --> 00:54:18.708 Nose and it put a clarity
00:54:18.708 --> 00:54:21.379 dash in front of them on the
00:54:21.379 --> 00:54:22.738 website actually killing.
00:54:22.740 --> 00:54:25.930 So that's these are message
00:54:25.930 --> 00:54:28.482 largely because of the.
00:54:28.490 --> 00:54:29.834 But the custom name that I'm
00:54:29.834 --> 00:54:31.380 having to use with this that's
00:54:31.380 --> 00:54:32.880 not the normal human convention.
00:54:34.910 --> 00:54:38.180 So that's the reason for
00:54:38.180 --> 00:54:40.369 the failures. Do you mean?
00:54:44.940 --> 00:54:46.029 I just that.
00:54:48.540 --> 00:54:54.710 Donald caps. There. This is actually.
00:54:54.710 --> 00:54:55.946 Not part of that folder that's
00:54:55.946 --> 00:54:57.569 part of why this stuff is failing.
00:55:00.490 --> 00:55:01.630 And regular client, that
00:55:01.630 --> 00:55:03.055 stuff would have been correct,
00:55:03.060 --> 00:55:05.048 but the in this it's not so.
00:55:13.830 --> 00:55:15.510 Gotta check this before I started running it.
00:55:17.840 --> 00:55:20.798 So that should be fine then.
00:55:20.800 --> 00:55:22.188 Say that close that.
00:55:24.560 --> 00:55:27.730 Press the page. Hopefully it picked up
00:55:27.730 --> 00:55:29.570 that change enough that I can do this, but.
00:55:33.950 --> 00:55:37.248 Get it. Which means the website
00:55:37.248 --> 00:55:39.390 should be able to run now.
00:55:39.390 --> 00:55:40.776 At least get to the next thing.
00:55:45.130 --> 00:55:45.919 What is this?
00:55:52.980 --> 00:55:55.488 Out of what?
00:55:55.490 --> 00:55:58.700 Call with Google Voice extension.
00:55:58.700 --> 00:56:00.662 Care about this extension so my
00:56:00.662 --> 00:56:02.973 copy and edit my list of stuff
00:56:02.973 --> 00:56:04.833 I don't care about go away.
00:56:14.800 --> 00:56:18.090 Dictate fine. I haven't received it yet,
00:56:18.090 --> 00:56:19.130 so that's also problematic.
00:56:19.130 --> 00:56:21.088 OK, so there's a couple of things
00:56:21.088 --> 00:56:23.675 we can do here because it didn't do
00:56:23.675 --> 00:56:26.020 their things that it just doesn't do.
00:56:26.020 --> 00:56:31.476 First go to the Google doc for the
00:56:31.476 --> 00:56:35.390 translations for 2020.48 and older.
00:56:35.390 --> 00:56:37.172 So open the Google Doc here and I'm going
00:56:37.172 --> 00:56:38.957 to add that stuff to my SQL database.
00:56:43.070 --> 00:56:47.340 Get a query. Stopping it.
00:56:47.340 --> 00:56:48.450 OK, I'm gonna go ahead and
00:56:48.450 --> 00:56:49.627 add both English and on which
00:56:49.627 --> 00:56:50.809 causes my local and their load.
00:56:50.810 --> 00:56:52.830 All that stuff anyway.
00:56:52.830 --> 00:56:54.800 Looks like there's a couple
00:56:54.800 --> 00:56:56.770 of new translation you add.
00:56:56.770 --> 00:56:57.400 These were quick.
00:57:17.450 --> 00:57:19.874 We don't know why somebody keeps
00:57:19.874 --> 00:57:21.490 changing these column sizes.
00:57:21.490 --> 00:57:23.604 These are all that this should be
00:57:23.604 --> 00:57:26.020 right to left, so he's to play online.
00:57:28.770 --> 00:57:31.250 So here here up top E and then wait for
00:57:31.321 --> 00:57:34.075 the Ant lines to show up because it takes
00:57:34.075 --> 00:57:36.546 awhile to get all this in the clipboard.
00:57:43.090 --> 00:57:49.060 Listen my query. Will get the admin ones.
00:57:49.060 --> 00:57:51.400 People stop changing my column sizes.
00:58:00.780 --> 00:58:01.800 Copy this line.
00:58:05.760 --> 00:58:10.821 Here. Run it. While it's running,
00:58:10.821 --> 00:58:14.833 I'm going to start a query for my 2021.1
00:58:14.833 --> 00:58:17.930 ones because they are different. I'm.
00:58:20.150 --> 00:58:22.100 Chapman just switch to the other.
00:58:38.290 --> 00:58:40.978 So in the 2021.1 and later I have
00:58:40.978 --> 00:58:43.597 replaced a bunch of those translations
00:58:43.597 --> 00:58:46.393 so that we can remove duplicates.
00:58:46.400 --> 00:58:47.675 You'll notice here,
00:58:47.675 --> 00:58:49.800 with storefronts there's two 2108
00:58:49.800 --> 00:58:52.780 -- 1 because of the title row,
00:58:52.780 --> 00:58:56.158 but in this one there are.
00:58:56.160 --> 00:58:58.188 About 320 more.
00:59:00.310 --> 00:59:01.218 That's all just duplicates
00:59:01.218 --> 00:59:02.810 that I was able to clear out.
00:59:06.370 --> 00:59:07.108 I don't know.
00:59:11.370 --> 00:59:12.708 So by clearing those duplicates out,
00:59:12.710 --> 00:59:14.509 this makes this package a lot smaller
00:59:14.509 --> 00:59:16.671 over the wire in one group performance and
00:59:16.671 --> 00:59:18.768 all kinds of other stuff over and over.
00:59:18.770 --> 00:59:20.840 So, and I'm trying to make sure that we
00:59:20.840 --> 00:59:22.752 don't end up with more duplicates than
00:59:22.752 --> 00:59:24.709 what we started with like previously.
00:59:24.710 --> 00:59:30.388 I'm. So there's 2541 for the admin side.
00:59:30.390 --> 00:59:33.890 And the admin side over here has.
00:59:33.890 --> 00:59:36.230 2326 now the part of the reason that the
00:59:36.230 --> 00:59:38.679 the newer one does have more admin ones,
00:59:38.680 --> 00:59:40.800 but it's actually fewer duplicates.
00:59:40.800 --> 00:59:42.886 It's a statuses and States and things
00:59:42.886 --> 00:59:44.897 that are that have the translations
00:59:44.897 --> 00:59:47.003 are added into this database that
00:59:47.003 --> 00:59:48.408 were not there before.
01:00:16.790 --> 01:00:18.158 So honestly everyones I'm not going
01:00:18.158 --> 01:00:20.017 to pick up these other ones right now
01:00:20.017 --> 01:00:21.696 because the newest one like if they're
01:00:21.696 --> 01:00:23.430 definitely different than the old one.
01:00:23.430 --> 01:00:25.726 I'm not running any clients that are
01:00:25.726 --> 01:00:28.120 doing those right now socially them off.
01:00:28.120 --> 01:00:29.860 The new ones. These transitions
01:00:29.860 --> 01:00:31.600 will be getting really replaced
01:00:31.663 --> 01:00:33.599 when we make the new UI for blazor.
01:00:33.600 --> 01:00:35.728 For these three portals.
01:00:35.730 --> 01:00:38.818 Oh, I missed the.
01:00:38.820 --> 01:00:41.476 This piece I had to install this the.
01:00:43.880 --> 01:00:46.106 I have to install this door
01:00:46.106 --> 01:00:47.590 procedure for it first,
01:00:47.590 --> 01:00:51.006 so I do this and this or that
01:00:51.006 --> 01:00:53.949 or that like that 2021.1.
01:00:53.950 --> 01:00:58.412 Fat fat for that.
01:00:58.412 --> 01:01:00.476 This thing can run.
01:01:00.480 --> 01:01:01.600 This database.
01:01:04.640 --> 01:01:07.104 Oh 'cause I don't have them installed yet.
01:01:07.110 --> 01:01:10.788 OK, so this one ran. I have my stored
01:01:10.788 --> 01:01:13.369 procedure for 2020.48. This is the.
01:01:16.590 --> 01:01:20.010 20.48 So this one should be able to run now.
01:01:20.010 --> 01:01:22.280 Where it was failing before.
01:01:22.280 --> 01:01:24.062 And then sideways I need to
01:01:24.062 --> 01:01:26.119 go in and add the trends.
01:01:26.120 --> 01:01:28.040 The language is real quick too.
01:01:33.200 --> 01:01:33.990 Jacked
01:01:42.380 --> 01:01:42.970 maybe this.
01:01:45.680 --> 01:01:46.280 There we go.
01:01:51.820 --> 01:01:53.490 Get around to running these
01:01:53.490 --> 01:01:54.826 Catherine languages too so.
01:01:57.340 --> 01:01:58.576 So I have to run this.
01:01:58.580 --> 01:01:59.805 You have to write it by itself
01:01:59.805 --> 01:02:01.090 so that it defines the procedure
01:02:01.090 --> 01:02:02.512 as this block and that's it.
01:02:05.220 --> 01:02:07.170 And then we do this part.
01:02:09.890 --> 01:02:11.640 In these types or remember
01:02:11.640 --> 01:02:13.390 to mess with them later.
01:02:13.390 --> 01:02:15.400 This is running into the injection
01:02:15.400 --> 01:02:17.240 of all the language values.
01:02:20.230 --> 01:02:23.830 So that part should just kind of go in.
01:02:23.830 --> 01:02:25.372 I don't even know if there's
01:02:25.372 --> 01:02:26.670 too much more right now.
01:02:26.670 --> 01:02:29.750 OK, the next piece that I need.
01:02:29.750 --> 01:02:32.374 Is I need to get this Cydia injected
01:02:32.374 --> 01:02:34.389 because I don't have it yet.
01:02:34.390 --> 01:02:35.420 So we're going to go.
01:02:35.420 --> 01:02:37.485 I've never opened anything in this thing.
01:02:37.490 --> 01:02:38.322 Really, other than that,
01:02:38.322 --> 01:02:40.260 one thing I gotta clear all this other junk.
01:02:47.560 --> 01:02:49.520 Say that and then it just leaves
01:02:49.520 --> 01:02:51.696 all this crap in here that I don't.
01:02:51.700 --> 01:02:54.204 Don't even know what all this stuff is.
01:02:54.210 --> 01:02:56.280 Whatever ******** out.
01:02:56.280 --> 01:02:58.656 I'm gonna go find my solution file here.
01:02:58.660 --> 01:03:00.150 Right click shift, right click
01:03:00.150 --> 01:03:01.940 copy as path based, open it.
01:03:04.140 --> 01:03:05.428 Thanks to Resharper I will be able
01:03:05.428 --> 01:03:06.838 to run the test pretty quickly.
01:03:18.290 --> 01:03:19.990 That's years, but that's fine.
01:03:24.910 --> 01:03:27.052 They can just keep running back
01:03:27.052 --> 01:03:29.040 or something it will finish.
01:03:29.040 --> 01:03:29.736 The two minutes?
01:03:29.736 --> 01:03:31.128 That's a long time to run.
01:03:33.190 --> 01:03:35.550 OK, do you hear?
01:03:37.970 --> 01:03:41.120 How old you control key?
01:03:41.120 --> 01:03:42.608 So that it opens 2 Windows,
01:03:42.610 --> 01:03:44.025 there's the unit test explorer
01:03:44.025 --> 01:03:45.811 from Resharper and then the unit
01:03:45.811 --> 01:03:47.099 test session from Resharper.
01:03:47.100 --> 01:03:48.222 List explorer.
01:03:48.222 --> 01:03:51.588 Will populate once I build again.
01:03:51.590 --> 01:03:53.420 It's like here I think.
01:03:56.920 --> 01:04:01.080 It's gonna break. Cancel.
01:04:01.080 --> 01:04:02.508 Extensions re sharper options.
01:04:02.508 --> 01:04:04.950 Does it have the thing turned off?
01:04:08.810 --> 01:04:13.560 Teacher no. Some features.
01:04:13.560 --> 01:04:16.552 Hope that took care of this with the
01:04:16.552 --> 01:04:18.008 settings earlier. This is coming.
01:04:22.500 --> 01:04:25.308 That and that save and restart.
01:04:29.560 --> 01:04:30.928 OK, that's nice.
01:04:34.940 --> 01:04:39.258 Yes, old. Close it and restart Visual Studio
01:04:39.258 --> 01:04:42.330 so that that feature gets turned off.
01:04:42.330 --> 01:04:45.229 Wish that was part of the. Thank you, OK.
01:05:17.950 --> 01:05:19.138 Robbie fix a little.
01:05:26.570 --> 01:05:27.950 Do you use that one so?
01:05:47.620 --> 01:05:49.196 This is another thing I want to do,
01:05:49.200 --> 01:05:51.552 but you do it until I do
01:05:51.552 --> 01:05:53.150 the other thing first.
01:05:53.150 --> 01:05:55.230 OK, it's found the test,
01:05:55.230 --> 01:05:58.230 so run CD in order.
01:05:58.230 --> 01:06:01.520 Yeah, it runs all seated over run.
01:06:01.520 --> 01:06:02.292 Can create a session.
01:06:02.292 --> 01:06:03.450 This session is going to physically
01:06:03.484 --> 01:06:04.639 have that there and it's going to
01:06:04.639 --> 01:06:05.817 see my database with the seed data.
01:06:22.220 --> 01:06:25.286 Give me my login and everything so.
01:06:25.290 --> 01:06:26.818 Rich, it'll work nicely.
01:06:29.780 --> 01:06:31.510 Usually takes about 30 seconds.
01:06:36.850 --> 01:06:39.424 Stop me this test window in it open anymore.
01:06:46.840 --> 01:06:51.355 It's gonna ship OK. Close this one.
01:06:51.360 --> 01:06:54.888 Problem these two for when I get to 2021.1.
01:06:54.890 --> 01:06:56.216 Go take care of those two.
01:07:10.000 --> 01:07:12.891 Another thing I can check while I'm
01:07:12.891 --> 01:07:15.510 waiting here is desktop modules.
01:07:15.510 --> 01:07:17.778 Clarity of e-commerce scheduler,
01:07:17.778 --> 01:07:20.700 see if it runs. It's been
01:07:20.700 --> 01:07:22.000 getting product reef lately.
01:07:41.540 --> 01:07:45.826 Recently, despite get some
01:07:45.826 --> 01:07:48.520 stuff with you. Michael.
01:07:51.040 --> 01:07:55.380 The thing to get the scheduler work.
01:07:55.380 --> 01:07:58.182 Yeah, get it to work. So let's just
01:07:58.182 --> 01:08:00.080 see if it loads on its own right now.
01:08:06.060 --> 01:08:07.470 Listen friend like do the
01:08:07.470 --> 01:08:09.200 infinite loop or some stupid crap.
01:08:19.390 --> 01:08:20.210 Doing something.
01:08:22.640 --> 01:08:24.105 Nope, it's doing the infinite
01:08:24.105 --> 01:08:27.010 loop right now. OK. So.
01:08:33.000 --> 01:08:39.040 Your. Go to. Thank you submitted a PR.
01:08:41.130 --> 01:08:42.858 I had it recently so I can look
01:08:42.858 --> 01:08:44.717 at the PR exactly what you did.
01:08:47.400 --> 01:08:48.564 This is going to be problematic
01:08:48.564 --> 01:08:50.036 for me 'cause I have to have
01:08:50.036 --> 01:08:50.908 scheduling order on the.
01:08:50.910 --> 01:08:52.718 Translations, but more requests,
01:08:52.718 --> 01:08:54.990 not sucking ***** and stuff.
01:09:00.610 --> 01:09:02.210 It might just be in one of these
01:09:02.210 --> 01:09:03.688 PR's too hard it can fix that.
01:09:12.490 --> 01:09:13.390 This one you're saying
01:09:13.390 --> 01:09:14.515 it's supposed to be here.
01:09:14.520 --> 01:09:17.824 I thought it was, I guess not.
01:09:17.830 --> 01:09:19.515 Maybe it's just another copy
01:09:19.515 --> 01:09:21.880 of it and it got updated.
01:09:21.880 --> 01:09:23.629 Add some stray.
01:09:26.620 --> 01:09:28.831 A schedule or something here? Yeah,
01:09:28.831 --> 01:09:30.439 this one has the stuff that we changed.
01:09:37.840 --> 01:09:41.250 Do its rockets in changes?
01:09:51.770 --> 01:09:52.350 Spencer
01:09:55.310 --> 01:09:56.330 save.
01:10:01.120 --> 01:10:01.669 It's too late.
01:10:09.000 --> 01:10:15.050 Fat piece and then. He speaks of CS as.
01:10:22.860 --> 01:10:23.570 That's.
01:10:29.440 --> 01:10:32.168 Meaning that it's fine.
01:10:32.170 --> 01:10:33.946 It's at the should
01:10:33.946 --> 01:10:35.278 automatically fix itself.
01:10:35.280 --> 01:10:36.840 Yeah, and fix itself.
01:10:36.840 --> 01:10:39.180 Global asax we had a couple
01:10:39.266 --> 01:10:41.099 of modifications there.
01:10:48.100 --> 01:10:52.378 Is. Let me try to edit that.
01:10:56.920 --> 01:10:59.468 Start up that piece.
01:11:02.150 --> 01:11:04.780 Would not you? Do.
01:11:07.820 --> 01:11:10.970 You that piece and that makes
01:11:10.970 --> 01:11:13.005 that part happy and I have not
01:11:13.005 --> 01:11:14.650 configured this yet so projects.
01:11:16.930 --> 01:11:20.880 File. No columns project.
01:11:23.150 --> 01:11:28.208 File. Russian state showcall error.
01:11:32.350 --> 01:11:33.220 We should do more in one
01:11:33.220 --> 01:11:34.199 of these at the same time.
01:11:40.010 --> 01:11:42.285 OK, so that stuff a little happier.
01:11:46.290 --> 01:11:48.722 And there was a thing that I saw
01:11:48.722 --> 01:11:50.717 online that was supposed to be.
01:11:50.720 --> 01:11:53.138 In the startup, you're supposed to
01:11:53.138 --> 01:11:56.475 be able to register the app into the
01:11:56.475 --> 01:11:59.350 owing context or something, so app Dot.
01:12:05.310 --> 01:12:06.336 Would be problematic.
01:12:06.336 --> 01:12:09.550 Why did it do that? Go app dot.
01:12:14.030 --> 01:12:15.760 Restart.
01:12:29.800 --> 01:12:35.562 Find stuff. The final draft Stop
01:12:35.562 --> 01:12:37.790 solution analysis. Thank you.
01:12:46.790 --> 01:12:47.280 Set.
01:13:08.920 --> 01:13:09.530 Flask.
01:13:14.790 --> 01:13:15.350 Phone.
01:13:25.330 --> 01:13:25.800 Stop.
01:13:27.860 --> 01:13:29.200 Yeah, scheduler dot startup,
01:13:29.200 --> 01:13:31.209 that's that class, it's right there.
01:13:38.250 --> 01:13:41.480 Let me go in app start up there. But
01:13:44.000 --> 01:13:45.690 just get a value. True,
01:13:45.690 --> 01:13:48.770 it's got automatic app startup.
01:13:48.770 --> 01:13:51.346 Saying use it by an actual direct name.
01:14:00.140 --> 01:14:00.890 Straight that.
01:14:05.170 --> 01:14:08.446 See if that. Makes it changed it as well.
01:14:08.450 --> 01:14:12.430 'cause I can use that name that. As.
01:14:18.270 --> 01:14:24.106 Fat see if that makes any kind of difference.
01:14:24.110 --> 01:14:26.360 There was another thing that.
01:14:50.570 --> 01:14:52.110 Stop this on this page,
01:14:52.110 --> 01:14:55.288 but it was something that I found.
01:14:55.290 --> 01:15:00.510 Anne. Yes, I think this is it, yeah?
01:15:00.510 --> 01:15:03.538 So they put this in there too, like it's you.
01:15:03.538 --> 01:15:05.194 Create per owin context and you
01:15:05.194 --> 01:15:06.724 put this little app builder
01:15:06.724 --> 01:15:08.512 on their wrapper on the class.
01:15:08.520 --> 01:15:09.528 That makes it work,
01:15:09.528 --> 01:15:11.040 and I had never tried that,
01:15:11.040 --> 01:15:13.299 so we're going to add the city here and
01:15:13.299 --> 01:15:15.829 so you can get this to do this this way.
01:15:28.100 --> 01:15:32.140 I can do here options, general settings
01:15:32.140 --> 01:15:36.100 or preferences on my path lips.
01:15:36.100 --> 01:15:38.708 Just forget the path to store on verse.
01:15:47.160 --> 01:15:51.896 Yes, OK. It commits, I can revert anything
01:15:51.896 --> 01:15:55.540 that tried to change, reverts yes.
01:15:55.540 --> 01:15:58.480 Now boom, it's really wanted to do.
01:16:08.960 --> 01:16:15.464 520 flick guidelines and guidelines.
01:16:15.464 --> 01:16:17.840 There we go, so there's my limit on
01:16:17.840 --> 01:16:20.667 how wide I want to be able to go.
01:16:20.670 --> 01:16:22.482 I don't know why it's doing
01:16:22.482 --> 01:16:23.996 it that narrow, but OK,
01:16:23.996 --> 01:16:26.710 so this puts it in there like that is.
01:16:26.710 --> 01:16:28.480 I guess it really wanted to
01:16:28.480 --> 01:16:30.030 just be an expression body,
01:16:30.030 --> 01:16:31.540 so let's just do that.
01:16:33.910 --> 01:16:36.670 Actually, I disposable so.
01:16:36.670 --> 01:16:38.578 Make it readonly, sure.
01:16:38.578 --> 01:16:42.319 They get you need app and it does.
01:16:42.320 --> 01:16:45.098 That's that's happened.
01:16:45.100 --> 01:16:48.180 We're live this to its own file.
01:16:53.580 --> 01:16:58.375 This into our configure here like that
01:16:58.375 --> 01:17:02.460 giving this stupid class. This piece
01:17:06.300 --> 01:17:07.250 I need to know what?
01:17:10.720 --> 01:17:11.688 And elsewhere, you're supposed
01:17:11.688 --> 01:17:13.140 to be able to do this.
01:17:15.980 --> 01:17:19.253 To get access to it. I see it
01:17:19.253 --> 01:17:20.519 supposed to include this is simply
01:17:20.519 --> 01:17:21.979 to get that extension method.
01:17:24.880 --> 01:17:27.477 I thought we already had installed here.
01:17:31.700 --> 01:17:33.656 Yesterday it didn't go in OK,
01:17:33.660 --> 01:17:35.610 so I don't have that one,
01:17:35.610 --> 01:17:37.410 so let's add that reference or
01:17:37.410 --> 01:17:39.200 sorry managed to get packages.
01:17:42.130 --> 01:17:44.346 Yeah, they should be able to add that.
01:17:46.520 --> 01:17:49.030 May go away, go away,
01:17:49.030 --> 01:17:51.640 go away. Hello, wake up.
01:17:53.700 --> 01:17:55.080 This is the name I want.
01:18:02.710 --> 01:18:06.578 Install Harman online. OK. What?
01:18:06.578 --> 01:18:11.770 Owen ones do I have installed like this?
01:18:16.860 --> 01:18:21.186 Tearful at one. But at 710.
01:18:24.330 --> 01:18:25.494 Insecurity for that 10.
01:18:25.494 --> 01:18:27.825 OK so it's the first number has nothing
01:18:27.825 --> 01:18:29.921 to do with the same thing here so.
01:18:34.550 --> 01:18:35.570 She got one.
01:18:39.490 --> 01:18:43.634 It wants to insecurity 3.0 dot one.
01:18:43.640 --> 01:18:45.545 That's something I didn't need
01:18:45.545 --> 01:18:48.280 at corner. I do have that 1223.
01:18:51.490 --> 01:18:53.455 You have two three. OK, so I do
01:18:53.455 --> 01:18:55.170 have what I think this thing was.
01:18:57.990 --> 01:18:59.160 34 double
01:19:03.970 --> 01:19:04.930 back to that.
01:19:07.890 --> 01:19:09.898 Yeah, I think I have with this thing
01:19:09.898 --> 01:19:12.080 wants so I'm gonna install this woman.
01:19:17.530 --> 01:19:20.442 They wish we were moved up tonight 'cause
01:19:20.442 --> 01:19:23.270 they could get off that crap. Keep going.
01:19:27.550 --> 01:19:30.358 Thank you to install it Doctor.
01:19:30.360 --> 01:19:32.240 The scan OK except.
01:19:34.770 --> 01:19:36.570 K So now it identifies that,
01:19:36.570 --> 01:19:38.370 and perhaps that thing. It does.
01:19:38.370 --> 01:19:40.614 The new app builder provider that
01:19:40.614 --> 01:19:43.709 has that app and it might go ahead
01:19:43.709 --> 01:19:45.995 and add that documentation to it.
01:19:46.000 --> 01:19:48.046 Excuse me, I didn't even need
01:19:48.046 --> 01:19:49.890 to add anything else there,
01:19:49.890 --> 01:19:51.660 it just has it OK.
01:19:51.660 --> 01:19:55.594 And then my having it elsewhere piece.
01:19:55.600 --> 01:19:56.720 We're going to do.
01:20:01.070 --> 01:20:06.251 I'm gonna do. Thank you black.
01:20:06.251 --> 01:20:10.360 I go into the fire ask initializer.
01:20:10.360 --> 01:20:11.924 And Nope, the bootstrapper.
01:20:11.924 --> 01:20:13.879 That's the one I want.
01:20:13.880 --> 01:20:17.835 If app is not equal to null.
01:20:17.840 --> 01:20:21.428 Apple that else.
01:20:21.430 --> 01:20:24.166 At equal to I need that
01:20:24.166 --> 01:20:26.660 string that I got from.
01:20:29.000 --> 01:20:31.664 Sir, on this thing.
01:20:31.664 --> 01:20:35.930 So that I can. Try again with it.
01:20:42.450 --> 01:20:47.280 So we'll see if this gives me what I want.
01:20:47.280 --> 01:20:50.496 Your flow exception is not documented.
01:20:50.500 --> 01:20:53.628 See with that later. So we could even
01:20:53.628 --> 01:20:55.110 make this a simple like ternary.
01:20:57.580 --> 01:21:00.107 App or try to get it OK.
01:21:07.230 --> 01:21:08.150 I guess.
01:21:10.860 --> 01:21:13.980 Like if it's already set, just try to set it.
01:21:13.980 --> 01:21:15.825 Just try to use the one that it's got.
01:21:18.690 --> 01:21:22.306 Find. Oh, 'cause it wants to know legal.
01:21:22.310 --> 01:21:25.954 There we go. Universal test. OK.
01:21:25.954 --> 01:21:30.386 Let's see if that makes any real difference.
01:21:30.390 --> 01:21:35.614 I need to start up the tool thing.
01:21:35.620 --> 01:21:38.260 Free tools Fielty desktop,
01:21:38.260 --> 01:21:42.220 then let the bugnet by Windows.
01:21:42.220 --> 01:21:43.381 Pin to taskbar.
01:21:43.381 --> 01:21:47.180 Drag it over to left, run it.
01:21:47.180 --> 01:21:50.900 Admin rights should see.
01:21:50.900 --> 01:21:53.704 Apples now and before.
01:21:53.704 --> 01:21:56.508 If there were none.
01:21:56.510 --> 01:21:57.350 Stop them all.
01:22:11.230 --> 01:22:13.160 Hey there all stopped build.
01:22:18.670 --> 01:22:19.100 Speed.
01:22:21.470 --> 01:22:22.970 The order in which each one
01:22:22.970 --> 01:22:24.410 did stop before it starts,
01:22:24.410 --> 01:22:27.344 then just tell him to stop all at the
01:22:27.344 --> 01:22:30.469 same time on separate like test threads.
01:22:30.470 --> 01:22:31.770 Could be done faster.
01:22:38.400 --> 01:22:41.160 Yes, color is not working.
01:22:44.230 --> 01:22:48.180 Let's start them again. Yeah, it's.
01:22:50.240 --> 01:22:53.680 Yes, and see if it forwards in the
01:22:53.680 --> 01:22:55.860 correct thing. No, oh environment
01:22:55.860 --> 01:22:58.060 item was found in comments.
01:23:02.190 --> 01:23:03.915 Saying that, like you never
01:23:03.915 --> 01:23:05.295 ran the initial thingy.
01:23:16.760 --> 01:23:18.686 Basically, what we're running into before.
01:23:27.250 --> 01:23:30.238 App Nautical app app.
01:23:33.970 --> 01:23:35.665 Who? That I'm gonna write
01:23:35.665 --> 01:23:37.360 this in a try catch.
01:23:40.660 --> 01:23:41.990 Basically just told him to do it.
01:23:50.840 --> 01:23:54.636 Giving me dinner. So scheduler
01:23:54.636 --> 01:23:57.737 stuff I just told him to stop
01:23:57.737 --> 01:24:00.270 all in like an idiot. Click it.
01:24:10.740 --> 01:24:11.769 Just the schedule.
01:24:32.770 --> 01:24:34.216 The dashboard click
01:24:34.216 --> 01:24:36.626 activate and I get nothing.
01:24:48.430 --> 01:24:49.418 It worked this time.
01:24:54.270 --> 01:24:55.200 It did it.
01:24:58.720 --> 01:25:03.094 How I got a server and I got everything.
01:25:03.100 --> 01:25:04.549 It ran the translation file is running,
01:25:04.550 --> 01:25:07.819 task is doing all this stuff correctly.
01:25:07.820 --> 01:25:09.380 I hope that this actually
01:25:09.380 --> 01:25:10.628 fixed the real problem.
01:25:13.770 --> 01:25:14.890 If this actually fix it,
01:25:14.890 --> 01:25:16.010 that's going to be amazing.
01:25:18.140 --> 01:25:19.733 So I need to turn the other apples on.
01:25:23.640 --> 01:25:26.016 Yeah, I should have C data in there.
01:25:26.020 --> 01:25:27.796 I should have translations in their
01:25:27.796 --> 01:25:28.938 translation file. Should load.
01:25:28.938 --> 01:25:31.506 It's got your icon because this one is not
01:25:31.506 --> 01:25:33.438 formatted to load that icon correctly.
01:25:33.440 --> 01:25:36.110 But this is the older version.
01:25:36.110 --> 01:25:37.886 But this should all be there,
01:25:37.890 --> 01:25:39.660 and when is this runtime error?
01:25:54.270 --> 01:25:56.090 OK. Yep, I think it did everything
01:25:56.090 --> 01:25:58.057 I needed to do for it correctly.
01:25:58.060 --> 01:25:59.260 For right now I should be
01:25:59.260 --> 01:26:00.520 able to log in as well.
01:26:02.800 --> 01:26:04.781 Yeah, I can log in. OK.
01:26:04.781 --> 01:26:07.427 So that part is now correct.
01:26:07.430 --> 01:26:09.544 24 Eight is now up and running.
01:26:09.550 --> 01:26:11.762 I need to go to the admin
01:26:11.762 --> 01:26:13.530 and inject my products.
01:26:13.530 --> 01:26:14.986 Which I have to re download my.
01:26:17.260 --> 01:26:18.932 File for that. I think I have it
01:26:18.932 --> 01:26:20.665 just in my drop box here for my.
01:26:27.150 --> 01:26:30.898 Projects seff imports Robert.
01:26:33.750 --> 01:26:36.858 Soon as I get into the admin.
01:26:36.860 --> 01:26:38.264 The import these prices
01:26:38.264 --> 01:26:39.317 should import everything.
01:26:50.170 --> 01:26:51.180 Products.
01:26:54.830 --> 01:26:56.951 I am not old index the products
01:26:56.951 --> 01:26:59.280 and want the index I want or
01:26:59.280 --> 01:27:01.302 actually now that I've done that,
01:27:01.310 --> 01:27:04.328 I can actually look at cabana.
01:27:04.330 --> 01:27:07.548 You can see. Yep, there's the indexes.
01:27:07.548 --> 01:27:09.268 There's the default one that ran on its own,
01:27:09.270 --> 01:27:11.447 and there's the one that I just
01:27:11.447 --> 01:27:13.829 hit did did manually back soon.
01:27:13.830 --> 01:27:16.100 Import products, click the file.
01:27:16.100 --> 01:27:18.818 Here's the file path go loaded.
01:27:18.820 --> 01:27:22.108 Import the data yes.
01:27:22.110 --> 01:27:23.630 However long this takes.
01:28:09.210 --> 01:28:12.150 Yep, in the broadly speaking.
01:28:12.150 --> 01:28:13.908 So the transfer sizes even smaller
01:28:13.908 --> 01:28:16.112 than it would be on, not broadly.
01:28:16.112 --> 01:28:18.117 And we put the ruling,
01:28:18.120 --> 01:28:19.600 and so it's going to.
01:28:19.600 --> 01:28:20.788 It's going to prioritize
01:28:20.788 --> 01:28:21.976 broadly if it's available.
01:28:34.150 --> 01:28:36.940 Take your argument and go ahead
01:28:36.940 --> 01:28:38.620 and like. Being imported.
01:28:40.920 --> 01:28:43.490 If there is the schema.
01:28:43.490 --> 01:28:48.929 The product's product select. I'm at 97.
01:28:48.930 --> 01:28:56.126 110 one 25136 summer Sun under 40.
01:28:56.130 --> 01:28:59.010 No errors. OK, so there's my
01:28:59.010 --> 01:29:02.530 product so indexing now. OK.
01:29:02.530 --> 01:29:05.477 Let's go to the store front again.
01:29:05.480 --> 01:29:09.008 And let's go to the catalog.
01:29:09.010 --> 01:29:10.753 Should have product so I haven't gone
01:29:10.753 --> 01:29:12.867 to the catalog yet so I don't worry
01:29:12.867 --> 01:29:14.182 about clearing caches or anything.
01:29:14.190 --> 01:29:15.738 There's products and products have pictures.
01:29:17.930 --> 01:29:20.540 And it loaded in 1.8 seconds,
01:29:20.540 --> 01:29:22.280 finished in 4.43 seconds.
01:29:22.280 --> 01:29:24.020 I refreshed the page.
01:29:24.020 --> 01:29:27.980 It should go even faster.
01:29:27.980 --> 01:29:28.810 2.59 seconds.
01:29:28.810 --> 01:29:30.885 Because it was able to
01:29:30.885 --> 01:29:33.240 dis cache of other stuff,
01:29:33.240 --> 01:29:35.816 so we're under 3 seconds right now.
01:29:35.820 --> 01:29:38.238 Are my local.
01:29:38.240 --> 01:29:39.308 That's without like trying
01:29:39.308 --> 01:29:40.376 to load balancing any
01:29:40.376 --> 01:29:41.380 creative stuff like that.
01:29:44.580 --> 01:29:46.200 OK, so this website is now
01:29:46.200 --> 01:29:47.280 officially working and functioning.
01:29:47.280 --> 01:29:49.570 I would like to switch the icon it or the
01:29:49.631 --> 01:29:51.864 logo and everything but the other stuff.
01:29:51.870 --> 01:29:53.620 I don't care about this right now
01:29:53.620 --> 01:29:55.846 and I don't have any of the other
01:29:55.846 --> 01:29:57.261 settings and stuff turned on,
01:29:57.270 --> 01:30:01.113 so I worry about that so later excuse me.
01:30:01.120 --> 01:30:04.416 Wait so if that website is not done.
01:30:04.420 --> 01:30:07.759 I'm going to. PR that fix in.
01:30:10.100 --> 01:30:12.180 And if you want to.
01:30:12.180 --> 01:30:13.867 Since I did this without 48 any
01:30:13.867 --> 01:30:15.699 of the clients who are on that
01:30:15.699 --> 01:30:17.271 version can just pull this update,
01:30:17.280 --> 01:30:20.560 so it shouldn't be a big deal to.
01:30:20.560 --> 01:30:22.940 Turn to pull that into the clients.
01:30:26.260 --> 01:30:27.508 Explore building skills.
01:30:39.680 --> 01:30:42.795 Hello. Figure.
01:30:42.795 --> 01:30:45.765 Sorry that all that looks right.
01:30:45.770 --> 01:30:46.760 Package lock changed
01:30:46.760 --> 01:30:48.080 and it shouldn't have,
01:30:48.080 --> 01:30:52.315 so I'm just going to revert it.
01:30:52.320 --> 01:30:54.660 Config added that line.
01:31:00.940 --> 01:31:03.670 Yep, we added that stuff.
01:31:03.670 --> 01:31:05.254 We added all these things so
01:31:05.254 --> 01:31:07.345 that it can try to grab it
01:31:07.345 --> 01:31:08.645 in multiple different ways.
01:31:08.650 --> 01:31:10.162 Yep, and all of that seems
01:31:10.162 --> 01:31:11.460 to be working fine now.
01:31:17.120 --> 01:31:22.130 Yep. We don't really need the.
01:31:22.130 --> 01:31:24.710 The button here to deactivate
01:31:24.710 --> 01:31:27.290 it didn't do anything anyway.
01:31:27.290 --> 01:31:29.341 We're going to count it down after
01:31:29.341 --> 01:31:30.590 three seconds instead of 10.
01:31:35.990 --> 01:31:39.700 And just let that be the thing that it does.
01:31:39.700 --> 01:31:41.824 Say that. Salmon because it just
01:31:41.824 --> 01:31:44.100 removed that from the other files.
01:31:44.100 --> 01:31:47.403 I can get rid of the force on here.
01:31:47.410 --> 01:31:48.859 And the designer.
01:31:48.859 --> 01:31:51.274 That was creating this stuff.
01:31:51.280 --> 01:31:53.000 We're just going to
01:31:53.000 --> 01:31:54.720 basically revert the file.
01:31:54.720 --> 01:31:56.418 They needed to do anything else.
01:31:56.420 --> 01:31:58.408 OK, so that stuff gets cleared out.
01:31:58.410 --> 01:32:00.674 We get rid of these extra pack files.
01:32:04.820 --> 01:32:06.195 Then there's our app builder
01:32:06.195 --> 01:32:07.570 provider, which is that class.
01:32:11.370 --> 01:32:15.144 Alright, brother Owen. Start up with
01:32:15.144 --> 01:32:19.760 it shouldn't be there. Builder lighter.
01:32:24.590 --> 01:32:27.266 Class save close start up here.
01:32:27.270 --> 01:32:30.396 Yeah it was going to basically
01:32:30.396 --> 01:32:32.480 duplicate that line so.
01:32:32.480 --> 01:32:34.664 We're just gonna take that second one out.
01:32:34.670 --> 01:32:37.965 I'm. And we also had that
01:32:37.965 --> 01:32:39.020 setting and change over there.
01:32:41.610 --> 01:32:42.705 For the scheduler.
01:32:42.705 --> 01:32:44.895 So in the webconfig at this
01:32:44.895 --> 01:32:47.161 this could be the other thing
01:32:47.161 --> 01:32:48.986 that helped get fixed too.
01:32:48.990 --> 01:32:51.629 So between that and the other piece
01:32:51.629 --> 01:32:53.947 is it probably just you having
01:32:53.947 --> 01:32:56.530 to do every possible thing at the
01:32:56.614 --> 01:32:59.176 same time to make this thing work.
01:32:59.180 --> 01:33:02.114 That got in there and that got in there.
01:33:02.120 --> 01:33:03.760 OK, so big Bush, OK?
01:33:07.180 --> 01:33:14.499 Lowe's OK? OK, so now the next piece here
01:33:14.499 --> 01:33:19.378 is to run the install part of 2021.1.
01:33:19.380 --> 01:33:21.466 I absolutely can run its pieces now
01:33:21.466 --> 01:33:23.847 that we know that we have that part.
01:33:23.850 --> 01:33:24.998 Before I do that.
01:33:24.998 --> 01:33:26.720 I want to basically apply those
01:33:26.784 --> 01:33:28.308 same scheduler fixes here,
01:33:28.310 --> 01:33:29.934 'cause I don't want this one to
01:33:29.934 --> 01:33:31.388 be playing but the same crap.
01:33:34.180 --> 01:33:35.755 Scheduler here. It's not going to be
01:33:35.755 --> 01:33:37.323 two different so I can just compare
01:33:37.323 --> 01:33:38.595 this folder with the other one.
01:33:41.870 --> 01:33:42.610 Flights.
01:33:44.930 --> 01:33:47.058 Edwin merch should be able to tell me.
01:33:49.230 --> 01:33:51.590 Filters yeah here on that,
01:33:51.590 --> 01:33:56.688 so why are you not? August of the show.
01:33:56.688 --> 01:33:58.840 Skipped items in jail. Binary files.
01:34:01.480 --> 01:34:03.870 Bush is still not be there, OK?
01:34:14.140 --> 01:34:18.132 Last. Get the new version
01:34:18.132 --> 01:34:20.198 pass. Take me ver Las.
01:34:22.390 --> 01:34:23.839 This is going to be a little
01:34:23.839 --> 01:34:25.090 different, so I don't want to
01:34:25.090 --> 01:34:26.130 take the entire thing here.
01:34:29.260 --> 01:34:32.972 Patient does it go? The only thing
01:34:32.972 --> 01:34:35.130 I really care about is going to be.
01:34:37.970 --> 01:34:40.014 Yeah, this thing is actually care about.
01:34:40.020 --> 01:34:42.064 Those are all just logging changes basically.
01:34:45.500 --> 01:34:48.300 Where to add this package to it?
01:34:48.300 --> 01:34:52.130 I need to compare. These things
01:34:54.250 --> 01:34:58.750 change win here in and adding.
01:34:58.750 --> 01:35:02.998 Two folders up on the path to it. Here we go.
01:35:06.000 --> 01:35:08.010 Esuite add file.
01:35:10.340 --> 01:35:10.880 Fiction.
01:35:18.720 --> 01:35:24.460 Change. Start up change.
01:35:24.460 --> 01:35:27.499 Convict change speeds.
01:35:34.390 --> 01:35:36.210 Items brush.
01:35:38.930 --> 01:35:43.740 Yeah. So now this this this.
01:35:47.330 --> 01:35:48.050 That's.
01:35:55.010 --> 01:35:56.110 Sky.
01:36:04.500 --> 01:36:05.844 Don't wake up and figure this out 'cause
01:36:05.844 --> 01:36:07.159 it hasn't loaded it with this one yet.
01:36:11.510 --> 01:36:16.029 Backfiles add new file.
01:36:19.590 --> 01:36:23.154 So we know that this is
01:36:23.154 --> 01:36:25.530 something we are loading.
01:36:25.530 --> 01:36:26.986 This isn't the same issue that some
01:36:26.986 --> 01:36:28.608 of the other ones have been seeing,
01:36:28.610 --> 01:36:30.150 where like you can load the dashboard,
01:36:30.150 --> 01:36:31.690 but it will not run a server,
01:36:31.690 --> 01:36:33.010 so hopefully this fixes that too.
01:36:33.010 --> 01:36:34.550 I just don't know if it will.
01:36:49.380 --> 01:36:51.000 There were a couple of lessons
01:36:51.000 --> 01:36:53.150 learned on this thing that I need to
01:36:53.150 --> 01:36:54.674 do with my quick install settings.
01:36:54.680 --> 01:36:57.319 I need to make sure that it's
01:36:57.319 --> 01:36:59.010 skipping the build tools.
01:36:59.010 --> 01:37:01.481 And there was the Fowler path and
01:37:01.481 --> 01:37:03.590 some other things that happened.
01:37:03.590 --> 01:37:06.470 But I want to deal with those after the fact.
01:37:06.470 --> 01:37:08.840 Rest of this should be fine.
01:37:08.840 --> 01:37:10.410 Save this file for now.
01:37:12.970 --> 01:37:14.794 Set up lower on that one so I
01:37:14.794 --> 01:37:16.397 will get rid of that piece.
01:37:18.980 --> 01:37:19.570 OK.
01:37:22.130 --> 01:37:23.450 So to me, yeah, OK,
01:37:23.450 --> 01:37:25.016 so that part should be OK.
01:37:28.340 --> 01:37:29.210 Should be OK.
01:37:32.450 --> 01:37:34.445 Zach close that yeah, I'll take that
01:37:34.445 --> 01:37:37.076 part of the part of the BAT file is that
01:37:37.076 --> 01:37:39.405 it adds this to your hosts file so you
01:37:39.405 --> 01:37:43.346 don't have to add it to your host file 2.
01:37:43.350 --> 01:37:45.546 Now I already had it in my host files,
01:37:45.550 --> 01:37:48.570 like they don't need this extra 1 so just ate
01:37:48.637 --> 01:37:51.589 it by removing that way removing that piece.
01:37:51.590 --> 01:37:56.088 And. Take care of that that way.
01:37:56.090 --> 01:37:57.510 This guy can go away.
01:37:57.510 --> 01:37:58.930 This is the old stuff.
01:37:58.930 --> 01:37:59.782 That's all good.
01:37:59.782 --> 01:38:00.918 Well and good now.
01:38:05.500 --> 01:38:08.750 That one. The real estate
01:38:08.750 --> 01:38:09.590 manager should refresh.
01:38:09.590 --> 01:38:10.990 Yep, it seized the Redis
01:38:10.990 --> 01:38:11.830 keys and everything.
01:38:11.830 --> 01:38:13.230 All that stuff is good.
01:38:15.730 --> 01:38:17.522 And cabanna if I check that I
01:38:17.522 --> 01:38:19.486 should see a valid index. Yeah,
01:38:19.486 --> 01:38:22.258 that actually is products in it there.
01:38:22.260 --> 01:38:23.598 Here's the new ones of products.
01:38:27.710 --> 01:38:29.888 OK, so now. I do basically
01:38:29.888 --> 01:38:32.529 the same thing I did with the.
01:38:32.530 --> 01:38:35.362 With the quick install from 20
01:38:35.362 --> 01:38:39.138 to 8.48 and run run after this
01:38:39.138 --> 01:38:42.113 one instead you another command
01:38:42.113 --> 01:38:45.049 prompt that is admin rights.
01:38:45.050 --> 01:38:46.840 Need to see you later.
01:38:49.480 --> 01:38:52.978 Look there you go and then I
01:38:52.978 --> 01:38:54.890 can start the click install.
01:38:54.890 --> 01:38:58.058 It's giving me the same kinds of warnings.
01:38:58.060 --> 01:38:59.752 That I need to, like, you know,
01:38:59.752 --> 01:39:01.600 have all my stuff in place which I've
01:39:01.653 --> 01:39:03.717 covered in this video in the previous one.
01:39:09.430 --> 01:39:12.808 EQ was unexpected at this time.
01:39:12.810 --> 01:39:17.950 So something's wrong. Off the bat.
01:39:17.950 --> 01:39:19.630 Get it 'cause the bat file.
01:39:37.400 --> 01:39:38.600 You Torres
01:39:43.110 --> 01:39:43.870 Spiro
01:40:26.340 --> 01:40:30.740 that's the correct. Thing for that. Great.
01:40:33.600 --> 01:40:36.855 Yep, that's what that supposed to be.
01:40:36.860 --> 01:40:39.332 Bring inside of a string in
01:40:39.332 --> 01:40:41.360 the ducorps. And do gors.
01:40:48.690 --> 01:40:50.186 Is the next line it would have printed.
01:40:50.190 --> 01:40:52.192 It would be this so it has
01:40:52.192 --> 01:40:54.159 to have been stopping here.
01:40:54.160 --> 01:40:56.960 Unexpected at this time.
01:40:56.960 --> 01:40:58.240 Why is pulling this crap?
01:41:36.650 --> 01:41:37.430 Elizur
01:41:54.460 --> 01:41:56.836 what happened is not supposed to do that.
01:42:01.060 --> 01:42:03.265 Yes, these are all quoted
01:42:03.265 --> 01:42:05.029 in closed and everything.
01:42:05.030 --> 01:42:07.298 And this is like not better problem.
01:42:07.300 --> 01:42:08.588 In the past brands.
01:42:12.810 --> 01:42:15.678 Redneck instead equals 0.
01:42:21.570 --> 01:42:23.720 Yeah, it took the neck.
01:42:23.720 --> 01:42:26.300 I don't know why it 0.
01:42:43.380 --> 01:42:45.716 File and see if that makes it lock.
01:42:51.360 --> 01:42:52.060 Bridger
01:42:56.330 --> 01:42:59.462 where about LA? Never reset configs
01:42:59.462 --> 01:43:01.990 on the client production box.
01:43:01.990 --> 01:43:03.514 Check out the again that's the
01:43:03.514 --> 01:43:06.650 website is going to make local, Yep.
01:43:06.650 --> 01:43:08.694 That's the database there.
01:43:08.694 --> 01:43:10.227 Pretty self local.
01:43:10.230 --> 01:43:13.520 Yep, that's what I want.
01:43:13.520 --> 01:43:15.193 So the entities that I want I
01:43:15.193 --> 01:43:16.710 already put the thing into it,
01:43:16.710 --> 01:43:17.690 so it's fine there.
01:43:23.290 --> 01:43:24.570 Yep me.
01:43:39.350 --> 01:43:39.940 Inflict
01:43:45.040 --> 01:43:45.880 Minecraft.
01:43:57.200 --> 01:43:58.410 Let me take that out.
01:44:01.420 --> 01:44:05.580 Using hadias. So.
01:44:11.130 --> 01:44:12.890 Yes, check the head version.
01:44:20.040 --> 01:44:22.400 Dictionary at the dictionary. Hey.
01:44:26.430 --> 01:44:27.930 Find commit push.
01:44:35.880 --> 01:44:38.328 There. No more complex.
01:44:41.540 --> 01:44:44.540 They. So what it was doing in the
01:44:44.540 --> 01:44:48.070 background there, which I will. May pause.
01:44:52.400 --> 01:44:57.458 It's pulled, gets master, it pulled.
01:44:57.460 --> 01:44:59.350 You know it couldn't resolve conflicts,
01:44:59.350 --> 01:45:01.558 but there was that it, you know,
01:45:01.558 --> 01:45:03.128 pruning clean up branches it,
01:45:03.130 --> 01:45:06.178 then copying config files.
01:45:06.180 --> 01:45:08.665 A red in the web config files.
01:45:08.670 --> 01:45:11.155 It set up the connection strings in
01:45:11.155 --> 01:45:14.037 the files in web and stuff it put
01:45:14.037 --> 01:45:16.541 symbolic skin links in for you so
01:45:16.541 --> 01:45:18.956 you don't have to do this manually.
01:45:18.960 --> 01:45:20.740 It did the NPM install.
01:45:20.740 --> 01:45:24.388 It is now running the group.
01:45:24.390 --> 01:45:26.766 It's going to build an in the minify
01:45:26.766 --> 01:45:29.246 for the storefronts and then it will go
01:45:29.246 --> 01:45:32.218 in and do the same stuff for the admin.
01:45:32.220 --> 01:45:33.328 Which are separate now.
01:45:38.810 --> 01:45:40.330 They are fully separate projects
01:45:40.330 --> 01:45:42.480 and portals that have their own node
01:45:42.480 --> 01:45:43.925 modules and everything on them.
01:45:43.930 --> 01:45:45.694 So that we can start moving more
01:45:45.694 --> 01:45:46.946 more forward more, further forward.
01:45:46.946 --> 01:45:48.434 With the storefront one like we're
01:45:48.434 --> 01:45:49.979 going to react, build and everything.
01:45:52.720 --> 01:45:54.750 Leave the admin the way that it is for now.
01:46:09.340 --> 01:46:10.150 Do something but.
01:46:14.480 --> 01:46:16.728 Yeah, here's the admin side doing a build.
01:46:23.840 --> 01:46:25.150 Admin minify.
01:46:42.120 --> 01:46:44.440 When you get restore.
01:46:44.440 --> 01:46:45.637 I'm the solution.
01:46:45.637 --> 01:46:48.430 This might go weird 'cause it's first.
01:46:48.430 --> 01:46:49.357 Well, second time.
01:46:49.357 --> 01:46:51.520 Somebody's package is going to be there,
01:46:51.520 --> 01:46:53.816 but some of them are for our
01:46:53.816 --> 01:46:56.287 newer for the done at 5 and for.
01:46:56.290 --> 01:46:57.474 For this please report
01:46:57.474 --> 01:46:58.954 also those may be wonky.
01:47:01.400 --> 01:47:05.062 Get up. Let's see the
01:47:05.062 --> 01:47:07.570 build works. Maybe simply.
01:47:11.210 --> 01:47:13.258 It stopped this happy on my control because
01:47:13.258 --> 01:47:15.407 of the way that packages get restored.
01:47:22.110 --> 01:47:24.042 Is it color janky about how
01:47:24.042 --> 01:47:25.008 they install themselves?
01:47:28.360 --> 01:47:30.244 We've had complaints filed with their
01:47:30.244 --> 01:47:32.470 repose with the big pick. Some yet.
01:48:29.390 --> 01:48:33.078 Remember good morning. Choose a
01:48:33.078 --> 01:48:35.390 title back to what you want to be.
01:48:39.860 --> 01:48:40.710 Spittle.
01:48:46.220 --> 01:48:49.658 Hey Bill, successfully that part works.
01:48:49.660 --> 01:48:51.403 My schema should work because I fixed
01:48:51.403 --> 01:48:52.767 the permissions database and we did
01:48:52.767 --> 01:48:54.111 it with the other Western other ones.
01:49:21.810 --> 01:49:25.090 Steam's done. That's almost
01:49:25.090 --> 01:49:26.640 30 MB. Hoping nearly done.
01:49:30.130 --> 01:49:31.818 Set up the apples.
01:49:37.220 --> 01:49:39.050 Will do add duplicate collection
01:49:39.050 --> 01:49:41.240 elements. Some of the apple stuff
01:49:41.240 --> 01:49:43.440 may have failed a little bit.
01:49:48.710 --> 01:49:49.916 And some of this stuff didn't
01:49:49.916 --> 01:49:51.080 take the color things there's.
01:49:51.080 --> 01:49:52.316 There's gotta be a typo or
01:49:52.316 --> 01:49:53.659 something in a couple spots here.
01:49:53.660 --> 01:49:54.305 Need to correct?
01:49:54.305 --> 01:49:55.380 It's down here by the.
01:49:58.950 --> 01:50:00.189 Just look at that real quick and
01:50:00.189 --> 01:50:01.756 see if I can find out with this.
01:50:07.110 --> 01:50:08.700 So it did.
01:50:10.820 --> 01:50:14.408 Reedy Chapel proper tools.
01:50:17.660 --> 01:50:19.907 She would have gone to this one.
01:50:23.220 --> 01:50:26.260 The root sites that.
01:50:26.260 --> 01:50:28.552 Yeah, this one and this one
01:50:28.552 --> 01:50:30.800 is the one that failed.
01:50:30.800 --> 01:50:33.648 It looks the same.
01:50:33.650 --> 01:50:35.264 Why did that one have failed
01:50:35.264 --> 01:50:36.340 while the other worked?
01:50:39.220 --> 01:50:42.580 Skate 32 M. Yeah, that's that's right.
01:50:48.180 --> 01:50:50.780 So we would have added the DN one.
01:50:50.780 --> 01:50:52.080 Yep, API been API,
01:50:52.080 --> 01:50:53.241 storefront scheduler, yeah.
01:50:53.241 --> 01:50:56.307 Add their root sites to IIS.
01:50:56.310 --> 01:50:59.576 Yep. He added the site,
01:50:59.576 --> 01:51:01.130 they put the app in there.
01:51:01.130 --> 01:51:02.866 I don't know why it's still not
01:51:02.866 --> 01:51:04.498 taking the color of those pieces.
01:51:06.580 --> 01:51:07.970 This is the right character.
01:51:23.870 --> 01:51:25.550 Maybe I need to be invented so I'll
01:51:25.550 --> 01:51:27.298 just be intended for the security.
01:51:34.440 --> 01:51:37.722 OK. So that peace happens.
01:51:37.722 --> 01:51:40.219 There were a couple of errors in here,
01:51:40.220 --> 01:51:42.628 so I'm going to go figure Windsor.
01:51:42.630 --> 01:51:45.170 The virtual directory objects.
01:51:55.210 --> 01:51:57.253 That might be the wrong name for that stuff.
01:52:02.880 --> 01:52:04.728 Faced with a host file that
01:52:04.728 --> 01:52:08.190 broke out in there. It's done.
01:52:08.190 --> 01:52:10.470 Let's look at the host file.
01:52:10.470 --> 01:52:12.750 Yep, they got the host file.
01:52:15.880 --> 01:52:17.085 Yeah, because I already have
01:52:17.085 --> 01:52:18.538 this here. I don't need it.
01:52:21.730 --> 01:52:23.569 Save without rights.
01:52:27.130 --> 01:52:28.480 Now let's look at IS
01:52:28.480 --> 01:52:29.560 because let's work janky,
01:52:29.560 --> 01:52:30.910 something happen like you first,
01:52:30.910 --> 01:52:32.800 this and I see the local website.
01:52:32.800 --> 01:52:33.577 My app pools.
01:52:33.577 --> 01:52:36.039 I see the four that I expected to create,
01:52:36.040 --> 01:52:37.930 except two of them are not assigned,
01:52:37.930 --> 01:52:39.950 which means something did fail.
01:52:39.950 --> 01:52:41.510 So let's figure out what's wrong
01:52:41.510 --> 01:52:43.790 with the images. Get it, yes.
01:52:43.790 --> 01:52:46.790 The desktop modules 30 Commerce UI
01:52:46.790 --> 01:52:50.507 admin Virtual directory does not exist.
01:52:50.510 --> 01:52:52.250 Search directory does not exist yet.
01:52:52.250 --> 01:52:53.700 You say that it does.
01:52:56.260 --> 01:52:59.724 For removing it. Nope, it doesn't like it.
01:53:02.010 --> 01:53:04.570 That doesn't like either.
01:53:04.570 --> 01:53:07.405 I wonder, maybe the names
01:53:07.405 --> 01:53:09.673 got duplicated by accident.
01:53:09.680 --> 01:53:11.200 Put them in there.
01:53:11.200 --> 01:53:13.778 Yeah sure, why not. I'm.
01:53:16.800 --> 01:53:18.456 Like it's supposed to be the.
01:53:22.150 --> 01:53:24.520 Health service service.
01:53:26.680 --> 01:53:29.860 Import admin imports.
01:53:29.860 --> 01:53:33.258 Some roots. My schedule here.
01:53:35.930 --> 01:53:40.630 Site name Highbridge.
01:53:44.110 --> 01:53:46.519 Those application pools.
01:53:54.120 --> 01:53:54.688 So I can see.
01:53:57.570 --> 01:54:03.970 The UI admin. Storefront
01:54:03.970 --> 01:54:05.010 there's joy still in front.
01:54:07.660 --> 01:54:10.048 The name part UI store from.
01:54:10.050 --> 01:54:11.653 We passed, the problem is that I
01:54:11.653 --> 01:54:13.300 didn't ever the wrong name in here.
01:54:13.300 --> 01:54:16.499 Nope, it's got anyways different right there.
01:54:16.500 --> 01:54:18.548 You a certified and you I enter pointing
01:54:18.548 --> 01:54:20.849 at their other things so I don't know why.
01:54:20.850 --> 01:54:23.530 At least that's not there.
01:54:23.530 --> 01:54:25.606 Let's do this. We're going to.
01:54:27.730 --> 01:54:31.718 Net stop W3 service.
01:54:35.620 --> 01:54:37.888 I need to get the right one.
01:54:37.890 --> 01:54:39.750 I'm gonna turn that off.
01:54:39.750 --> 01:54:42.350 I'm gonna go load me.
01:54:42.350 --> 01:54:44.711 Applications host config.
01:54:44.711 --> 01:54:47.859 Which is C windows.
01:54:50.730 --> 01:54:57.950 To find that, serve. Big application.
01:55:04.790 --> 01:55:08.378 Find the file because it's dumb.
01:55:08.380 --> 01:55:09.408 Straightening it this way.
01:55:13.270 --> 01:55:14.330 Back up.
01:55:17.790 --> 01:55:20.000 11N Plus there we go.
01:55:20.000 --> 01:55:23.490 OK, now I have this one and then I have.
01:55:23.490 --> 01:55:25.345 The one instance of configs
01:55:25.345 --> 01:55:27.888 like as an example that I can
01:55:27.888 --> 01:55:30.037 compare against if I go in here.
01:55:30.040 --> 01:55:31.510 But this one over here and then.
01:55:35.240 --> 01:55:36.980 Outlook it put a whole
01:55:36.980 --> 01:55:39.200 bunch of crap in here that.
01:55:39.200 --> 01:55:40.466 I got everyone gets rid of.
01:55:42.890 --> 01:55:43.630 Stuck.
01:56:04.110 --> 01:56:11.850 That bass lots of butter. And.
01:56:11.850 --> 01:56:14.230 This stuff is indented differently.
01:56:16.970 --> 01:56:20.480 So it's. Complaining.
01:56:24.510 --> 01:56:25.686 We should try to compare this.
01:56:25.690 --> 01:56:26.670 Win merchants can be even
01:56:26.670 --> 01:56:27.650 harder trying to open it.
01:56:29.760 --> 01:56:31.940 This stupid thing does that.
01:56:31.940 --> 01:56:33.445 Yeah, this stuff is like
01:56:33.445 --> 01:56:34.950 indented in an extra block.
01:56:50.220 --> 01:56:54.198 There. Rewrite module.
01:56:54.200 --> 01:56:58.468 Their URL routing module.
01:56:58.470 --> 01:57:00.339 Their script module.
01:57:03.610 --> 01:57:05.194 This looks better. It looks like
01:57:05.194 --> 01:57:07.077 this when I added some more models
01:57:07.077 --> 01:57:08.883 that they wanted to have at all.
01:57:11.780 --> 01:57:13.730 These are all indented weird,
01:57:13.730 --> 01:57:16.058 so let's just fix the indenting.
01:57:33.050 --> 01:57:35.194 Has a handlers and this one doesn't open.
01:57:35.200 --> 01:57:37.083 The handles are all on the other
01:57:37.083 --> 01:57:39.810 side of it, so let's move the
01:57:39.810 --> 01:57:42.210 modules down below the hands.
01:57:42.210 --> 01:57:45.690 How's that look? That part's happy,
01:57:45.690 --> 01:57:48.570 or this part is. Two men dented?
01:57:53.030 --> 01:57:53.890 Unindent's worth.
01:57:58.370 --> 01:58:01.280 How are things a lot happier?
01:58:01.280 --> 01:58:03.056 Still a little off, but a lot happier.
01:58:03.060 --> 01:58:03.944 Yeah, there's all this
01:58:03.944 --> 01:58:05.049 other stuff they did like.
01:58:05.050 --> 01:58:06.786 I had it so just stuff that I
01:58:06.786 --> 01:58:07.936 installed with the new thing
01:58:07.936 --> 01:58:09.490 that I didn't do the other one.
01:58:09.490 --> 01:58:11.266 This one had origin host on that part,
01:58:11.270 --> 01:58:12.817 but that was done at that one.
01:58:12.820 --> 01:58:15.238 So add these or this one.
01:58:15.240 --> 01:58:17.550 Select the one that's over there.
01:58:17.550 --> 01:58:19.475 In the second fix file
01:58:19.475 --> 01:58:21.400 where I will get correctly.
01:58:24.270 --> 01:58:29.480 With that newer stuff, OK? And then.
01:58:29.480 --> 01:58:31.920 I have no idea what those are, but sure.
01:58:34.880 --> 01:58:38.020 Hey. Status code 431.
01:58:40.720 --> 01:58:42.760 And stream some of this stuff
01:58:42.760 --> 01:58:44.120 just seems different for
01:58:44.186 --> 01:58:45.946 the sake of being different.
01:58:45.950 --> 01:58:48.980 Oh, see this one's got broccoli.
01:58:48.980 --> 01:58:50.180 Added afterward.
01:58:52.320 --> 01:58:56.138 This. This is using gzip
01:58:56.138 --> 01:58:57.446 from a different location.
01:59:00.040 --> 01:59:00.720 OK.
01:59:07.130 --> 01:59:08.320 Yeah, this one is allspice.
01:59:08.320 --> 01:59:10.000 Partly this is from this is
01:59:10.000 --> 01:59:11.529 because I had that installer
01:59:11.529 --> 01:59:13.569 that put it into that folder.
01:59:13.570 --> 01:59:15.264 But this one just tries to put
01:59:15.264 --> 01:59:17.178 it in with the command prompt.
01:59:17.180 --> 01:59:19.329 So these are just in a different
01:59:19.329 --> 01:59:21.328 order and she did write down.
01:59:23.930 --> 01:59:26.420 Yes, that made those line up.
01:59:26.420 --> 01:59:28.040 OK, this is these are all
01:59:28.040 --> 01:59:28.850 actual website please.
01:59:38.740 --> 01:59:40.410 Installed extra stuff that I
01:59:40.410 --> 01:59:41.746 can install previously so.
01:59:44.280 --> 01:59:45.960 This one has so has like some
01:59:45.960 --> 01:59:47.350 server auto start type things.
01:59:47.350 --> 01:59:49.440 Whatever in there that I
01:59:49.440 --> 01:59:52.190 didn't previously have. Hey.
01:59:52.190 --> 01:59:54.010 So problem is left really,
01:59:54.010 --> 01:59:57.250 it's just that he did like.
01:59:57.250 --> 02:00:03.074 Remove this site definition or clean it up.
02:00:03.080 --> 02:00:04.904 OK, so these things have their
02:00:04.904 --> 02:00:05.816 virtual directories years,
02:00:05.820 --> 02:00:06.420 US storefronts.
02:00:09.850 --> 02:00:12.370 Set auto storefront.
02:00:15.590 --> 02:00:18.990 Yeah, it looks right. That would be correct.
02:00:23.240 --> 02:00:24.170 All those.
02:00:27.160 --> 02:00:30.090 I did close, I guess, right yeah?
02:00:30.090 --> 02:00:31.530 Play some save this file I'ma
02:00:31.530 --> 02:00:33.210 start it again. I just wanna see
02:00:33.210 --> 02:00:34.650 if it makes a difference here.
02:00:42.840 --> 02:00:44.987 Oh, I think this path isn't right. 'cause
02:00:44.987 --> 02:00:46.856 this doesn't have the storefront on it.
02:00:50.510 --> 02:00:52.470 Yeah, I think that's where
02:00:52.470 --> 02:00:54.430 it failed for the scheduler.
02:00:57.380 --> 02:00:58.468 Yeah, this was missing.
02:00:58.468 --> 02:00:59.556 Is one piece OK?
02:00:59.560 --> 02:01:03.574 So if I do this here and say slash?
02:01:03.580 --> 02:01:07.009 API dash storefronts.
02:01:07.010 --> 02:01:08.240 I think that was there,
02:01:08.240 --> 02:01:09.465 and then it's supposed to
02:01:09.465 --> 02:01:10.690 also be API dash admin.
02:01:14.080 --> 02:01:17.740 I think that's why that failed.
02:01:17.740 --> 02:01:19.690 And then they have to specify
02:01:19.690 --> 02:01:20.990 their application tools because.
02:01:29.520 --> 02:01:32.450 So. Yeah.
02:01:36.330 --> 02:01:39.480 Let's start the service again.
02:01:44.910 --> 02:01:48.486 Give it. Does what it wanted.
02:01:48.490 --> 02:01:51.988 Everything has an apple assignment now.
02:01:51.990 --> 02:01:54.402 Local I can still see like the images folder.
02:01:54.410 --> 02:01:55.502 Their desktop modules, clearly
02:01:55.502 --> 02:01:57.639 e-commerce click on it and it works now.
02:01:57.640 --> 02:01:59.607 OK so that was where the failure
02:01:59.607 --> 02:02:01.731 happened was I think basically it was
02:02:01.731 --> 02:02:04.160 trying to use the wrong name in there.
02:02:04.160 --> 02:02:05.742 Something in here is not doing the
02:02:05.742 --> 02:02:08.370 path on those parts correctly, so the.
02:02:08.370 --> 02:02:11.820 Apppool piece for name part admin.
02:02:15.460 --> 02:02:19.548 In part OK, I think yeah,
02:02:19.548 --> 02:02:21.510 these are supposed to be like.
02:02:21.510 --> 02:02:24.429 API admin versus.
02:02:24.430 --> 02:02:26.726 I just admin and that means because
02:02:26.726 --> 02:02:29.065 I had added all those cores pieces
02:02:29.065 --> 02:02:31.968 but I didn't add him in this part so.
02:02:34.160 --> 02:02:37.576 You got you. I like those pieces.
02:02:37.580 --> 02:02:40.890 Those two pieces are OK.
02:02:40.890 --> 02:02:43.970 I think this part scheduler.
02:02:43.970 --> 02:02:46.376 Doesn't get API,
02:02:46.376 --> 02:02:51.990 but API part or Part API admin.
02:02:51.990 --> 02:02:53.604 Rapi admin yeah,
02:02:53.604 --> 02:02:56.730 so it's this one. Rapi.
02:02:59.430 --> 02:03:03.996 Bat and then part API storefront.
02:03:04.000 --> 02:03:06.080 There, there there. Should have
02:03:06.080 --> 02:03:09.018 had the correct names so that those
02:03:09.018 --> 02:03:11.358 two pieces are the reason that.
02:03:14.640 --> 02:03:17.195 Yeah, all that should be good now.
02:03:17.200 --> 02:03:19.216 In part it's I had corrected it up here,
02:03:19.220 --> 02:03:20.081 then corrected there,
02:03:20.081 --> 02:03:22.393 and in the course version of course I
02:03:22.393 --> 02:03:24.122 had all the correct means because I'm
02:03:24.122 --> 02:03:26.078 doing all that stuff in the core site.
02:03:26.080 --> 02:03:27.500 OK, so that was wrong.
02:03:27.500 --> 02:03:29.820 That's why I wish I had like a
02:03:29.820 --> 02:03:31.917 Typesafe version of this on here. OK,
02:03:31.917 --> 02:03:35.573 so that should correct the problem with that.
02:03:35.580 --> 02:03:36.903 And that did everything I wanted to
02:03:36.903 --> 02:03:40.520 do for a basic website, not course.
02:03:40.520 --> 02:03:43.676 OK, so since that set up.
02:03:43.680 --> 02:03:45.936 I have schema now so I should be
02:03:45.936 --> 02:03:48.267 able to run this procedure yeah,
02:03:48.270 --> 02:03:50.232 and since I had the stored
02:03:50.232 --> 02:03:51.213 procedure in there,
02:03:51.220 --> 02:03:53.516 I can run the languages and translations,
02:03:53.520 --> 02:03:56.840 so let's let those run.
02:03:56.840 --> 02:04:00.038 This is the.
02:04:00.040 --> 02:04:01.844 Is the old database.
02:04:01.844 --> 02:04:04.550 I need to open Visual Studio
02:04:04.644 --> 02:04:07.128 and get myself some C data.
02:04:07.130 --> 02:04:08.840 So oh.
02:04:10.960 --> 02:04:13.165 2. Which one?
02:04:13.165 --> 02:04:16.840 Just right click copy's path.
02:04:16.840 --> 02:04:20.050 Bring up here, he says.
02:04:20.050 --> 02:04:22.670 Matthew tells me sharper too.
02:04:22.670 --> 02:04:27.110 Not overly analyze stuff.
02:04:27.110 --> 02:04:28.109 The open set.
02:04:37.340 --> 02:04:38.972 And then this thing is also
02:04:38.972 --> 02:04:40.780 picking up all the new apples.
02:04:40.780 --> 02:04:41.880 Since it refreshes every second,
02:04:41.880 --> 02:04:44.260 you just picking him up. Clever.
02:04:54.540 --> 02:04:55.970 Here's all the new **** stuff.
02:04:59.190 --> 02:05:01.458 Sepakat on things with things out.
02:05:06.500 --> 02:05:06.920 So.
02:05:10.260 --> 02:05:14.859 Let me show you its initial stuff.
02:05:14.860 --> 02:05:16.876 I'm gonna go ahead and kick him it's.
02:05:21.200 --> 02:05:22.670 Encores app
02:05:29.310 --> 02:05:32.530 nothing changed it yeah.
02:05:32.530 --> 02:05:34.007 He does the part that we really
02:05:34.007 --> 02:05:35.059 changed right there and then.
02:05:35.060 --> 02:05:36.120 We also D intended it.
02:05:38.250 --> 02:05:40.066 To see if that fixes the color brella.
02:05:43.360 --> 02:05:43.800 Start.
02:05:50.980 --> 02:05:52.670 Initial liquors.
02:05:57.750 --> 02:06:00.930 Time is it. Start initializing everything.
02:06:37.590 --> 02:06:41.260 Turn off the global analysis.
02:06:41.260 --> 02:06:42.400 So don't need it.
02:06:45.610 --> 02:06:47.740 Please test so.
02:06:53.900 --> 02:06:54.360 Egypt.
02:06:56.460 --> 02:06:59.580 Yeah. Run that.
02:07:44.630 --> 02:07:45.878 Slower 'cause I'm reading this too.
02:08:46.960 --> 02:08:48.290 Not cydia.
02:08:51.450 --> 02:08:52.390 That part is finished.
02:10:02.490 --> 02:10:04.080 Morning shut up.
02:10:28.790 --> 02:10:29.826 That doesn't refresh there.
02:10:29.826 --> 02:10:31.380 I would love it if you
02:10:31.439 --> 02:10:32.787 auto refresh this instead.
02:10:53.260 --> 02:10:53.810 Yay.
02:10:59.550 --> 02:11:00.489 Like our souls.
02:11:04.990 --> 02:11:06.070 Skill you like?
02:11:17.090 --> 02:11:18.008 I'm finished already.
02:12:22.980 --> 02:12:25.670 Here goes. Simple cheese.
02:12:30.140 --> 02:12:30.610 Alright.
02:12:32.640 --> 02:12:35.648 Stop everything for the moment and I only
02:12:35.648 --> 02:12:38.656 want the local ones to run with being.
02:12:41.470 --> 02:12:43.070 And then I want to tell the scheduler
02:12:43.070 --> 02:12:44.589 to be done and start back up.
02:12:50.100 --> 02:12:52.942 Oh, actually I need to stop too
02:12:52.942 --> 02:12:55.850 because I need to make sure that.
02:12:55.850 --> 02:12:56.782 The app settings that
02:12:56.782 --> 02:12:57.947 set up correctly for it.
02:13:00.700 --> 02:13:02.056 I don't know that they did.
02:13:04.540 --> 02:13:04.910 Yep.
02:13:08.620 --> 02:13:09.390 Create there.
02:13:38.720 --> 02:13:40.020 Yeah, OK.
02:13:43.180 --> 02:13:46.186 Service scheduler and then I might go to it.
02:14:53.510 --> 02:14:56.918 Everything ran here.
02:14:56.920 --> 02:14:59.377 No jobs firing off. Yes for jobs.
02:15:03.990 --> 02:15:04.990 Succeeded.
02:15:11.560 --> 02:15:15.950 Find a part of the path what? What pass?
02:15:18.160 --> 02:15:22.070 OK. So then I'll fix that.
02:15:24.790 --> 02:15:25.660 Stop.
02:15:28.170 --> 02:15:29.505 Really just do that and
02:15:29.505 --> 02:15:30.840 not fix this thing yet.
02:15:34.430 --> 02:15:35.000 Read that.
02:17:10.570 --> 02:17:15.610 All of these are good. Canon. So let's go.
02:18:17.960 --> 02:18:18.320 That
02:18:25.720 --> 02:18:26.270 Mike.
02:18:30.320 --> 02:18:31.190 How?
02:18:33.430 --> 02:18:33.740 Weather
02:18:36.870 --> 02:18:38.960 let's check the portal aliases.
02:18:44.700 --> 02:18:47.530 Yeah, look at that. Client.
02:19:18.930 --> 02:19:20.580 OK, there we go, that's better.
02:19:26.440 --> 02:19:29.230 Finish loading up.
02:19:29.230 --> 02:19:30.436 Switch back and read it again.
02:19:55.750 --> 02:19:56.659 Well, that's loaded.
02:19:59.440 --> 02:20:01.528 Loads in 1.12 seconds.
02:20:03.910 --> 02:20:06.439 Performance boosts. I.
02:20:09.110 --> 02:20:11.110 Finance also maybe sign in.
02:21:15.270 --> 02:21:23.370 Play rocks. Imports. Excel file. Ronneby 10.
02:21:25.380 --> 02:21:28.031 I need you to fix that. OK,
02:21:28.031 --> 02:21:31.037 this is the Google author company
02:21:31.037 --> 02:21:33.260 will offer tent. Running that.
02:22:49.620 --> 02:22:56.280 Where is 1341 items index?
02:22:56.280 --> 02:22:59.760 Hey, back to the storefront.
02:22:59.760 --> 02:23:05.970 Catalog. Dance. Products.
02:23:05.970 --> 02:23:08.390 And if I reload.
02:23:08.390 --> 02:23:11.258 1.38 R 2.9 seconds loaded in
02:23:11.258 --> 02:23:13.170 less than 85 milliseconds.
02:23:13.170 --> 02:23:15.078 Finish in 2.9 seconds.
02:23:17.120 --> 02:23:20.990 He's a dish cat just caches.
02:23:20.990 --> 02:23:25.870 K. Yeah, that's what I want.
02:23:25.870 --> 02:23:28.425 So now I have a functioning website.
02:23:28.430 --> 02:23:29.726 I'll take some of my translations.
02:23:29.730 --> 02:23:30.810 Need to get fixed, but.
02:23:34.830 --> 02:23:36.456 Yeah, need to fix some translations.
02:23:40.970 --> 02:23:42.720 From the raw empty stuff.